GHL Doser 1 (old model)

[abhishek@1985]

Hi,

I have a GHL doser 1 which is now hooked to dose my balling solutions.
Am trying to configure it for the automatic mode.
I want to dose only 10 ml of alkalinity a day .
While configuring the instruction on the doser says -

1. Enter the number of dosings/day - 10
2. Rate/Dosing - this is where my confusion is !! Is it the total amount I want to dose in a day (i.e - 10 ml) or amount that should be dosed at each of the 10 dosing (1 ml)..

Remember, this is the older GHL Standalone doser with black manual dosing buttons ..
Please provide your thoughts !!!

Regards,
Abhishek

 

[NewJack]

it could be both. Just to confuse you more. I use the same unit, and mine sets like this. you will set it to dose 10 times a day/ @1 ml each dose. which will equal 10ml per day.
But, GHL used different software programs on those units, & depending on the version you have, it may set the other way. where all you do is set how many ti
es a day you want it to dose and, then the total amount you want dosed per day, which in your case is 10ml. The unit will do the math for you.
when setting up mine, I had NO ideal which software version mine had. So my suggestion is to set it one way, then let it dose into a cup, then measure the amount it's dosing. Hope that dosent confuse you even more.

 

[vitodog]

Its the amount you want to dose per dosing. Example, 10 ml (solution) per dosing X 10 = 100 ml of solution per day. Hope that helps.