Gph for gfo reactor

[DanLF]

What would the recommended gph be to run 3/4 lp. Of gfo in a vertex 2.5 reactor ?

 

[Marchillo]

I don't know that particular reactor but I'll give my opinion in general. I run gfo in a BRS deluxe reactor. I use an mj1200 pump. When I start with new gfo I have to really restrict the flow or it tumbles out of control. As time goes on I have to increase the flow to get the proper amount of tumble. As I'm about to change it after about a month in I have the restrictor completely open and it doesn't tumble quite as much as it's supposed to so time to change it. You definitely want something with a bit of extra flow so you can increase it as needed. Hope this makes sense.

Hopefully someone can chime in with more specifics on your particular reactor.

 

[whosurcaddie]

I would run a mag 3. You're going to want a flow restrictor regardless.

 

[whosurcaddie]

The Sicce Syncra 1.5/2.0 is a great choice as well. A little more expensive though.

 

[jj5]

+1 on the Sicce 1.5/2.0. Good choices but a flow valve will be necessary.

 

[Reef Frog]

The reactor manufacturers usually provide a range of recommended GPH ratings to operate their unit. If your reactor is sold by Marine Depot, they probably have a pdf of the instruction manual at the bottom of the product page.