Help with DIY Stand for 300

[reefinginsocal]

Hi guys,
Hoping you guys can help me with a template/design to build a wooden stand for my new acrylic 72x36x26 reef tank. This tank will be in wall and sump will go under the tank stand so I need to be able to access it from the back of the stand. Any help will be greatly appreciated.

 

[FFrankie]

If it's behind the scenes I would just have a frame welded up

 

[reefinginsocal]

Unfortunately the doorway is too narrow to fit a completed steel stand through. The stand will have to be made on the spot.

 

[druzzelle]

I built mine for my 240g long pretty easy, and I overbuilt mine.. all 4 corners have tripled 2x4's the three sections in the middle are all doubled 2x4's, with 2x4 cross braces every 2 feet both top and bottom, 3/4" plywood top and interior deck. 2.5" coated decking screws.. just have to decide what height you want it. hope this helps