Help with tank drilling

[Rich_1833]

Anyone want to help me drill my take. I looking to make an overflow and a closed loop I need about 6 holes drilled. I still need to find a drill bit. Ive never done this before so it will be a learning experience with me.

 

[Schplitter]

I drilled a few holes using cheap Japanese diamond bit holesaws. They were actually good. I learned that it is very important to just take it easy. If you think you are going too fast you probably are. Do not put any pressure on the glass while drilling. Let the weight of the drill do the work for you. If you do this right it might take you about 2 hours to drill the 6 holes.

Good luck

BK

 

[Schplitter]

One more thing: Lots and lots of water.

 

[Rich_1833]

no one O well looks like Im on my own. Here goes nothing.

 

[medic29]

I could help, but I'm a long ways off.

 

[ebe]

<a href=showthread.php?s=&postid=9842358#post9842358 target=_blank>Originally posted</a> by Rich_1833
no one O well looks like Im on my own. Here goes nothing.

I plan on drilling my 90 but I have zero experience. I just got the water out of it and still have completely decided if I am going to do a corner overflow or one on the top of the tank.