ryan c 0_o
New member
Wanted to share my new setup. Had an idea how to display my 3 Kessil A160we's over my tank. Works pretty well if anyone wants to try.
I decided to run the electrical through the wall behind my tank, then mounted the lights from a shelf attached to the wall. I didn't want to see any wires on the tank, so I was able to core out some channels with a long drill bit to hid the power cords and also the daisy chain links which allows the computer controlled dimming, I then fed a long bolt and nut to screw in the lights. All Ace Hardware parts.
End product is a way to suspend the lights without seeing any wires, check out the photos.
I decided to run the electrical through the wall behind my tank, then mounted the lights from a shelf attached to the wall. I didn't want to see any wires on the tank, so I was able to core out some channels with a long drill bit to hid the power cords and also the daisy chain links which allows the computer controlled dimming, I then fed a long bolt and nut to screw in the lights. All Ace Hardware parts.
End product is a way to suspend the lights without seeing any wires, check out the photos.