Leaky plumbing

[Stanton]

Just finished my plumbing on my slosed loop. Started my leak test and found two small leak on the ball balves. Is there anyway I can fix this or do I have to start completely over and buy two more valves.

I used the purple primer brownish cement. The hoses or piping I used was the white semi flexible pipe with the reinforcing rings in it.

 

[jdieck]

Dry the joint well. apply some primer around the joit trying to let it sip trough the leak and let it dry. Dilute some of the glue using some acetone to make it more fluid and apply it around the joint and let it dry well.

 

[prugs]

Did you prime & glue both male & female parts before assembly?