Lighting program

[Lepers]

Hi,

I want program my fixture with virtual outlets and sun commande but I don't understand everything.
I have :
* 2 x dimming leds (on variable ports)
* 2 x blue T5 on one outlet
* 4 x T5 on one outlet (purple, blue and daylight)
* 4 x T5 on one outlet (daylight)

I would like light on blue T5 firstly. and other T5 with 1 hour delay.
Reverse order for sunset.

Leds will be dimming slowly during 2 hours after light on blue T5 and reverse dimming down 2 hours before light off blue T5.

I don't know if it's very clear...

I have made four virtual outlets : Day, inter, sunset and sunrise but I don't understand how I can use sun command.

PS: sorry for my poor english...

 

[swearint]

The best place to start first is reading the Unofficial Users Guide that is stickied at the top of this forum. That will give you a solid foundation, then if you have specific issues, someone here may be able to help.

Todd

 

[Lepers]

I have read it...

 

[Eddie James]

I'm considering buying the controller so I have downloaded the manual first and I am reading through it. As I read through, I ran across this link with lighting and other routines already written:

http://www.kenargo.com/apexProgram/index.php

Will any of those help with your application, or at least point you in the right direction?