making some room. Stuff for sale

JCR's Reef

New member
I need to make room so I can get some other projects done and start some new ones. So...

Big 6'L x 2'7" W x 2' H acrylic sump. Sump has 6 bays measuring 11 1/2" wide. Setup to drain into a spray bar, filter through trays to hold filter floss,media. Has a 2" hole for a bulkhead in each top back corner. Has a 1 3/4" hole for a bulkhead in the bottom center of sump. Bulkheads not included. Trays arent pictured, but I have them. Asking $175
5-09-08698.jpg

5-09-08699.jpg

5-09-08700.jpg

5-09-08701.jpg

5-09-08702.jpg
 
Weipro Protein skimmer- Gate valve for water level, Ball valve for pump control, venturi injector. Collection cup has an attachment for a drain hose. Cup also has a crack in the bottom of it but it does not affect the performance in any way. Might need a new airline fitting as the one on it is loose. Its a ball valve still fitting. Doesnt affect the performance of it though. 25"tall,8"wide,11"deep with all fittings.
I was using a mag 9.5 pump on this skimmer. Was running a heavily stocked 110g tank. Asking $75
5-09-08205.jpg

5-09-08703.jpg

5-09-08705.jpg

5-09-08706.jpg
 
Pinpoint PH monitor with probe. Bought off another reefer and have never used it. Asking $50
5-09-08691.jpg


Pinpoint wireless thermometer with 1 sensor. asking $25

Coralife tubo twist 9watt UV sterilizer. Bulb 6 months old,6mths life left. Just need tubing and a small power head. Asking $50
5-09-08694.jpg
 
Mag 9.5 pump. Never had any problems with these kinds of pumps. Asking $55
5-09-08707.jpg


Small proclear aquatics sump. Asking $20
5-09-08693.jpg


50' Python hose- Asking $30
5-09-08692.jpg
 
ASM G3 skimmer with the Sendra 5000 Pump. Skimmer has not been modified in anyway other than glueing the rubber grounment to the cylinder body for the pump. Still pretty new looking.
1st picture is 1 hour after cleaning the collection cup
5-09-08685.jpg

5-09-08686.jpg
 
Pheonix mh Bulbs
150watt DE Pheonix 14k bulb- 2weeks old, not even really burned in yet. $50

150watt De Pheonix 14k bulb- 3 months burn time, 7hr day- $40

Coralife DE 10k bulb-used for 6 months- $20

Plusrite 175watt DE 14k bulb. used 1 month $15

Coralife 48" T5 2x28 (1-10k,1-actinic) Bulbs are around 6 months old. Asking $25

Brandnew 36" spider MH reflector. still has protective film on it. Asking $20

2x96 watt square pin PC ballast. 2 available. Came with a tank I bought. I wired them up real quick and they work fine. Might need new endcap. Premium Aquatics sells endcaps for $4.
Asking $30 each
5-09-08697.jpg

5-09-08695.jpg

5-09-08696.jpg
 
Last edited:
55 gallon tank with Oak trim. $55
40gallon long tank. $40
(2) 29 gallon used as sump-$20 each

I'm going to be selling my 25g frag tank with stand, sump, and plumbing (no pumps, lights, or livestock) if anybody is interested.
5-09-08499.jpg
 
INTERESTED IN THE Pinpoint PH monitor with probe AND wireless thermometer. Is the probe and sensor in good working condition? Where in Indiana are you located?
 
Hey Josh what are the dimensions of the 29g you were using as a sump as I am interested in using one under my 75g.....provided it will fit. Let me know and if it will fit under a 75g consider one sold.......thanks!
 
<a href=showthread.php?s=&postid=14446970#post14446970 target=_blank>Originally posted</a> by LornaS
Hey Josh what are the dimensions of the 29g you were using as a sump as I am interested in using one under my 75g.....provided it will fit. Let me know and if it will fit under a 75g consider one sold.......thanks!

The 29's trim and all are 30 1/4" L x 12 1/4" Deep x 19" H
 
Josh.....consider it sold....can you bring it to the zoo meeting? that is the 29g.... :)
 
Back
Top