Moving my tank. Any Suggestions?

pskirby95

New member
Im getting ready to move and need to bring my tank with me. It doesn't have a whole lot with it at the moment, just the 55G tank it's self, a backpack skimmer, 2 powerheads, a marine land LED light setup (which is going to be replaced by an Orbit Marine LED) about 60 pounds of live rock and a good 25 pounds of live sand. I do have some live stock as well, a baby hippo, clown, and two blue damsels. Any suggestions to the easiest way to move it? And anything I can get in the future to help my tank bloom?
 
I would not reuse your sand, it will contain a lot of trapped detritus that if released could start a new cycle, killing off all your livestock. Start fresh with dry sand. Be sure to wash the sand well before using it. To wash the sand place 5 pounds or so at a time in a 5 gallon bucket. Use a garden hose at full flow to agitate the sand. The finer grains of sand will overflow the top of the bucket, leaving the larger grains behind. Continue to agitate the water until it runs clear. I would not use "live" sand as it can contain more dead than live organisms and has the potential to start a new cycle (and cost more to purchase since you are paying for water). Try to reuse as much clean water from the old system as possible to lessen the shock of new water chemistry on your livestock. Once the water from the old tank starts to get murky from stirred up detritus, don't reuse that water. Have plenty of new pre-made and preheated saltwater on hand at your new home to make up for the lost water. I would plan on pre-making 50% of your display tank's volume and have it ready for use. 5 gallon buckets with lids are your best friend for a tank move. Anything larger becomes very heavy to move, although for longer moves ice chests work well at maintaining water temperatures. You can use bubble wrap to help keep your rock with corals attached from being smashed against the sides of the buckets during transport. Start by filling three buckets 1/3 with water from the tank and then add the rock from the system to one of the buckets. Continue filling buckets first with water, then rock until you have removed all the rock. Save a couple of half full buckets of clean water from the tank for the fish. Once all the rock has been removed, the fish should be easy to catch. Some fish will burrow into the sand to hide so if you come up short on your fish count you may need to sift through the sand to find the missing fish. Once you have everything back at your new home and the tank in place, first set up your rock. Try to minimize the amount of time the rock is out of the water. If aquascaping the rock takes you awhile, pour some of the saltwater from the old set-up on the rock to keep it wet. Once the rock is set fill the tank with all the old water and whatever new water is necessary. You can just dump the fish directly from the buckets into the new tank to prevent injuring the fish or adding stress to the fish by netting them. Then start circulating the water, get the heaters running and the rest of the equipment. Tank moves take much longer than one would first suspect. Plan on a very long day. Best of luck and keep us posted with your results!
 
I moved mine about 3 months ago and it was a pita, but i would recommend lots of home depot buckets. for your rock your going to want to keep it submerged in water with as minimal heat loss as possible just like your fish and corals. The fish and corals I would move first of course, and when you get to the location unload them first and hook up all you heaters and have some air pumps with air stones to circulate the water. The rock and sand last but again i would try to make it as fast as possible. I left my sand in the tank when i moved it with very little water but i did have some die off in the sand because it got cold and now have diatoms on the sand that will not go away but other that that if you like your aquascape that your currently have i would take pictures of the rock work so you can easily mirror it over to the new place. I also bought some water containers and put some of the tank water in there, because i didn't want to start with a 100% water change so i saved some of the old tank water.
 
Back
Top