Nano-Skimmer?

Fuegofish777

Fuegofish777

New member
Hello everyone,
I just bought a "Fission" nano-skimmer and was wondering if anyone else has used them. i should have asked this before but i rarely get to go to the lfs that carries them so i just picked it up. its made by Current USA. upon intallation it immediatley didnt work but i think that was due to my lack of finess with all things "nano". ;) i managed to overhaul it alittle, the stock pump was a little too wussy for me. seems to be working decently, only been running for an hour so i'll post updates. Any one else running one? are there any other commercially available skimmers that fit into 12 gal nano cube?
 
seems to be working alright. i upgraded to a maxi-jet though, and i used a regular airline hose instead of that puny one. works better now :)
 
<a href=showthread.php?s=&postid=6993901#post6993901 target=_blank>Originally posted</a> by Fuegofish777
seems to be working alright. i upgraded to a maxi-jet though, and i used a regular airline hose instead of that puny one. works better now :)
Click to expand...

I just installed one in my 10 gal. still workig on adjusting it. I am interested in your max-jet mod. Any pictures of how you set it up?
 
I have had the fission skimmer for over a week now. it has yet to produce any protien into the collection cup. I think I will try the maxi-jet powerhead as well and see how that does.
 
I have one been running it for 2 weeks now.. Adj. water height and still no skim-mate. I'm kinda fed up with it.. Waste of money I tend to believe.

Thinking I'll go skimmerless with my 12 gal Nano. Setup a Fuge in Compartment #2 with LR rubble and Cheato.

Cut Foam block in half and below that put Chemi-pure or carbon.
I have upgraded my pump to a MJ900 I may goto a 1200 undecided yet.

All my tests come up at Zero.
Cycled with LR for 1 month
Been stocked and running for 1 month.

So 2 months total Run time.
 
sorry i havent responded, i was caught up with school. anyways, i dont have any pics right now but i connected the maxijet with 1/2" clear hose. i have the air hose hooked up the same way as the stock pump (through strainer, although you have to break off one of the little bars to fit air tube). the suction cup mount from the maxijet can support the weight of the skimmer. after some height adjustments, it produced a full cup of skimmate after 3 days. thats really good considering the tank i was testing it on has practically NO bioload and had just done water change. did any of you notice the little drain out the side of the cup? i hooked up another airline to a water bottle, so that way you dont have to worry about checking it everyday. i was surprised that nothing about that was mentioned in the directions. i'll try to get some pics of it up later.
 
I have one and i do not like it. to much adjusting and messing with it. bout to throw it in the trash.
 
<a href=showthread.php?s=&postid=7001407#post7001407 target=_blank>Originally posted</a> by Fuegofish777
sorry i havent responded, i was caught up with school. anyways, i dont have any pics right now but i connected the maxijet with 1/2" clear hose. i have the air hose hooked up the same way as the stock pump (through strainer, although you have to break off one of the little bars to fit air tube). the suction cup mount from the maxijet can support the weight of the skimmer. after some height adjustments, it produced a full cup of skimmate after 3 days. thats really good considering the tank i was testing it on has practically NO bioload and had just done water change. did any of you notice the little drain out the side of the cup? i hooked up another airline to a water bottle, so that way you dont have to worry about checking it everyday. i was surprised that nothing about that was mentioned in the directions. i'll try to get some pics of it up later.
Click to expand...

look forward to the pics. And what Max-Jet did you use?
 
i just remembered my brother took my camera with him to seattle, so i cant take any pics for a week! sorry. i used the 600 model but im thinkin about going with the 900 instead. the 600 seemed to have lost steam the last 2 days. i'll get pics up as soon as i get my camera back
 
I am running a CSS 65 on the back of my 10 gal, it takes up a little space, but it surely works! Tons of skimmate. I have seen the fissions around, but the reaction chamber seems too tiny. The longer the air is in contact with the water the better. Good luck. I would really like to see some pics of this skimmer working. I have wondered about them myself.
 
I have a 24 gal. Aquapod HQI Unit I did purchase a Fission nano Skimmer but after doing a little research and reading forums like this one I decided to just purchase a AquaC Remora. I read great reviews about this HOB skimmer. I should be picking one up today so I will post an update when I get it up and running.
 
interesting because i had bought an aqua C remora pro hob and was very dissapointed with its performance i think i would go with a CSS before the aqua C but i have heard different reviews on the remora. Good luck! my personal favorite skimmer for a good price is the asm if you have the room for a sump i highly recommend this skimmer. also look at the turboflotor 1000 multi it cost a little more than the remora but i think it is a much better skimmer.
 
The Remoras are pretty loud from what I am told, however I have never seen or heard one run, but I figured I would through in what I heard.
 
sorry i already sold it a while ago it was very quiet though i didnt have any problems with noise. I guess i just didnt have a good experience with a decent skimmer
 
You must log in or register to reply here.

Similar threads

BuckeyeFish
Nitrate control: 24g nano
Replies
6
Views
380
BuckeyeFish
BuckeyeFish
M
Adding Corals to Aquascape
Replies
7
Views
246
griss
griss
BuckeyeFish
AIO 24g refugium?
Replies
1
Views
138
griss
griss
Brian60077
Big project starting today......
Replies
7
Views
143
Dustin07
D
J
Thinking of coming back...
Replies
11
Views
524
ClarkiiClownfish
C
Back
Top