Ukreeferguy2020
Member
Hi all. I saw my Maroon Clowns had spawn a few weeks ago and so I sprung into action to try and keep them going. The first batch didn't last longer than a few days with 50% missing after the first night in the tank and so I put a flowerpot in for the next lot which I then removed as soon as I saw the eggs on there. I placed them in a secondary tank in the garage with some tank water, air stone and a small pump.
I then began trying to set up a rotifer and Phyto station for when/if they hatch.
Rotifers.
So I built a rack to house 3x 3ltr bottles inverted with the tops cut off and used as lids. Airline run into each and a bottle of Rots from my LFS put in. The first couple of days I added more fresh saltwater that I filtered first with a coffee filter to increase the volume of water. After that I have been removing about a third and replacing again with filtered saltwater. Now currently I didn't have a heater in and the temp was sub 10. The green Phyto that I put in never seemed to clear and always stays green suggesting that they are not eating it. and/or growing/multiplying. I have since put a heater in and keeping it at 20 and again, the green doesn't seem to be clearing much.
Phyto.
I bought a smallish container, sterilised it using baby sterilising liquid and let to air dry. I filled about 400ml of phyto from LFS and 40ml of new RO water and a few drops of Miracle Grow (didn't have any F2 at the rime and wanted to experiment).
I wired in a standard bayonet cap 6500k bulb and placed it in front of it and put an airline in. No heater. After about a week the culture was exactly the same green as started.
My F2 arrived and so I put a little bit of that in as per the dose guide. Nothing for the next week or so. Same colour.
I then bought a slightly higher powered 6500k LED flood light and fitted that, within a few days the whole culture is now just a cloudy white colour.
Can anyone please point out some obvious errors in what I am doing with this. There is likely numerous things but any help would be appreciated.
Many thanks,
Steve
I then began trying to set up a rotifer and Phyto station for when/if they hatch.
Rotifers.
So I built a rack to house 3x 3ltr bottles inverted with the tops cut off and used as lids. Airline run into each and a bottle of Rots from my LFS put in. The first couple of days I added more fresh saltwater that I filtered first with a coffee filter to increase the volume of water. After that I have been removing about a third and replacing again with filtered saltwater. Now currently I didn't have a heater in and the temp was sub 10. The green Phyto that I put in never seemed to clear and always stays green suggesting that they are not eating it. and/or growing/multiplying. I have since put a heater in and keeping it at 20 and again, the green doesn't seem to be clearing much.
Phyto.
I bought a smallish container, sterilised it using baby sterilising liquid and let to air dry. I filled about 400ml of phyto from LFS and 40ml of new RO water and a few drops of Miracle Grow (didn't have any F2 at the rime and wanted to experiment).
I wired in a standard bayonet cap 6500k bulb and placed it in front of it and put an airline in. No heater. After about a week the culture was exactly the same green as started.
My F2 arrived and so I put a little bit of that in as per the dose guide. Nothing for the next week or so. Same colour.
I then bought a slightly higher powered 6500k LED flood light and fitted that, within a few days the whole culture is now just a cloudy white colour.
Can anyone please point out some obvious errors in what I am doing with this. There is likely numerous things but any help would be appreciated.
Many thanks,
Steve