I have a PM kalk reactor and a Tunze ATO set up that is causing me headaches. Freshwater reservoir (raised three inches off floor to prevent siphon) feeds into Kalk reactor sitting on floor which feeds into tank sump. I keep ending up with kalk powder in the freshwater bucket. any help?
need some help with Kalk reactor set up.
- Thread starter TheBBW
- Start date
edandsandy
Active member
+1
dzeadow
Premium Member
+2
I don't know what pump you use, but I'm using a MJ1200 stepped down to 1/4" and used this check valve from Premium Aquatics, works good. Just make sure you put it in between your pump and the kalk reactor so only fresh water is touching it.
http://www.premiumaquatics.com/Merc...roduct_Code=JG-1/4SCV&Category_Code=johnguest
I don't know what pump you use, but I'm using a MJ1200 stepped down to 1/4" and used this check valve from Premium Aquatics, works good. Just make sure you put it in between your pump and the kalk reactor so only fresh water is touching it.
http://www.premiumaquatics.com/Merc...roduct_Code=JG-1/4SCV&Category_Code=johnguest
