Art VandeLay
New member
Hi,
Needing some help programming my ACjr and aquasurf.
Background......T5 lighting with two switches to turn on/off 2 banks of lights
One Koralia 1400 on one end of the tank and one Tunze 6100 on the other end of tank. There is also a light on the refugium, and a heater.
So what I have so far is the basics of what I had before adding the aquasurf and tunze. One timer programs turns on LT1 at sunrise and off at sunset. Another timer turns on LT2 45 minutes after sunrise and 45 minutes before sunset. A third timer turns on LT3 when LT1 turns off.
Now this is where i get into trouble...I want the tunze to have its intensity ramp from 33 percent to 90 percent. I also want it to turn on for 1 second and then off for one second for wave making. I want the koralia to oscillate on and off for 10 minutes on and 20 minutes off at the same time the tunze is wave making. I am using the koralia pointed along the back wall and down to keep any dead spots from forming. I am trying to make all this happen when LT1 is on...in other words during day time. After sunset (or after LT1 is off) I would like to change the intensity factor for the tunze down to 33 percent up to 50 percent.
I was hoping to make this like pump profile 2 and let pump profile 1 be the daytime profile. I just cant seem to get to the point where I am entering all the pertinent information for the profiles.
Another problem I have encountered is since updating the flash on my old ACjr and adding the aquasurf I have lost the icons on the bottom from what they used to be. I get all mmmmm's now. I have checked to make sure I picked the right icons for each timer and I still get all mmmmm's.
Any help would be greatly appreciated...
Art :fun4:
Needing some help programming my ACjr and aquasurf.
Background......T5 lighting with two switches to turn on/off 2 banks of lights
One Koralia 1400 on one end of the tank and one Tunze 6100 on the other end of tank. There is also a light on the refugium, and a heater.
So what I have so far is the basics of what I had before adding the aquasurf and tunze. One timer programs turns on LT1 at sunrise and off at sunset. Another timer turns on LT2 45 minutes after sunrise and 45 minutes before sunset. A third timer turns on LT3 when LT1 turns off.
Now this is where i get into trouble...I want the tunze to have its intensity ramp from 33 percent to 90 percent. I also want it to turn on for 1 second and then off for one second for wave making. I want the koralia to oscillate on and off for 10 minutes on and 20 minutes off at the same time the tunze is wave making. I am using the koralia pointed along the back wall and down to keep any dead spots from forming. I am trying to make all this happen when LT1 is on...in other words during day time. After sunset (or after LT1 is off) I would like to change the intensity factor for the tunze down to 33 percent up to 50 percent.
I was hoping to make this like pump profile 2 and let pump profile 1 be the daytime profile. I just cant seem to get to the point where I am entering all the pertinent information for the profiles.
Another problem I have encountered is since updating the flash on my old ACjr and adding the aquasurf I have lost the icons on the bottom from what they used to be. I get all mmmmm's now. I have checked to make sure I picked the right icons for each timer and I still get all mmmmm's.
Any help would be greatly appreciated...
Art :fun4:
