Pulse mode loud

[bambam918]

I have a MP60 and MP40 on my 180 6-foot tank and I really want to use the short pulse mode but the motor is really loud when it ramps up. When I have it on reef crust mode they both are quitter (surprisingly the MP60 is quitter all the way around). Could the bearings be bad? I don't hear the same noise on reef crest when the pumps are at a stronger flow.

Any other ideas on what is causing the loud ramping? I know its not from bad alignment because on other modes they are silent and again I hear the noise from the dry side. Thanks in advance

 

[Alex Y EcoTech]

Bam,

I would recommend ensuring both wetsides are clean and spinning freely. In many cases a dirty wetside can create more noise especially when in pulse modes.

 

[bambam918]

I will give that a try and report back!

 

[sanababit]

Mine do it two, it sound like when you are sawing a piece of wood of wood or something, with the saw going back and forth

Sana

 

[Shakeeb]

hello

hello

to be honest i have mp 60 in my tank and dont let me start talking about the noise...
to be honest i am mad cause they are suppose to say about the noise...
i have my tank in my living room so we all sit their...
i turn it down to no mood when we are in the house...
the noise would be like a big humm humm with i am in the pink mood...

 

[Shakeeb]

on more thing its supper clean from outside and inside the water...
the motor that is outside produce this noise ....

 

[Alex Y EcoTech]

Shakeeb,

If you are concerned about the noise of your VorTech, I would recommend contacting us directly.

 

[Shakeeb]

Shakeeb,

If you are concerned about the noise of your VorTech, I would recommend contacting us directly.

buddy am not pointing on any one... its just I ordered this where I live far away from every one lebanon...
And I give u a video to hear it if u want...