Red Sea ozone 200 Mg controller with probe

[asmodeus]

well I broke down and bought a ozone unit.

ow how is the heck can i get this thing going? I hear that you don't need a air pump from the guy that i bought it from. Can some one send me some pictures of this unit up and running? Can any one talk me thur point by point to hook it up since i dont have instructions.

I know you have to run ozone thur the air dryer before having it suck into the skimmer too but im lost with all other things to hook up. Its porbably easy then pie but im not seeing it.

how is everyone running the water thur carbon i have a euro reef skimmer in sump can you send out some pic's on how to run water thur the ozone.

thanks Mike

 

[vijaym85]

Air pump to air dryer to ozone unit then either into your skimmer if it has a ozone port or into an ozone reactor if you have that.
It really is that simple. Of course if you may need check valves if lower than water level.
I personally use the aqir pump not sure if it matters if you dont.
That said if this is a AQUAZONE PLUS model than simply connect the probe into the port and initally turn down the ozone production to zero and increse the set point to maximum . There is a toggle switch to change readings. Observe your inital ORP and then select what you want as a set point so that the unit turns off at that point and turns back on after it drops slightly. After that adjust your Mg/hr to suit your tank needs.
As a reminder always place activated carbon at the output of your skimmer or ozone reactor. I run my water through a fluidized carbon filter.
If this is not a aquazone plus model you will need to calibrate your contraoller to monitor ORP and control it as per manufacturer instructions.

 

[asmodeus]

i have the red sea controller with probe

 

[asmodeus]

ok how is everyone running Carbon with their Euro reef with ozone.

pictures would be great

and oh ya what tubing is everyone running

and what tubing is everyone running the black stuff or the clear.