Mine ran at below 40 PSI and it worked but not well. After getting with Jim at the filter guys I added a pressure pump and it now works great and puts out plenty of water.
Watch for or PM AZDesertRat as he is pretty good on RO/DI systems and their needs.
Higher pressures up to as much as 90 or 100 psi are better, 60 to 80 is ideal. 40-50 will probably work but what may kill you in conjunction with the low pressure is low water temperature, either has a huge impact on production rates but both together will really slow a system down. Here is a link to Dow Filmtecs graphs showing the effects they each have. Dow recommends 50 psi and 77 degrees F.
If you are on well water you can just change the pressure cut off switch from a 20-40psi to a 40-60psi at the blue pressure tank. If it is municiple water with low pressure you can use an in-line pressure pump sold at www.thefilterguys.biz for about $100
Changing your well pressure switch is not always a good idea, you need to be aware of the shutoff head pressure on your well pump along with the fact your power consumption will go up significantly since you are raising pressure to the whole house 365 days a year. It not an efficient way to do things.
My plumber did it for me and I love it! No more weak showers and it cut my RO/DI wast water in half. Like I said, the other option is an in-line pump placed just before you water maker.
Mine is 32 psi and I only run my ro/di long enough to keep my holding tank (10 gal aquarium) topped off. My well water is avg of 71 degrees year round. I replentish about 2 gals aday due to evaporation.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.