Sea Swirl Accessories

[JasonF]

I have the 1/2" sea swirl, and need to direct the flow better. It's just blowing around the top of the tank, and I need it to angle down a bit. Do the flare nozzles you sell, just slip on the outlet end, and can you adjust the direction some?

 

[jasonfrey]

Hi Jason,

The flare nozzle would replace the stock nozzle you have. You would pull the nozzle you have off and put this one on in splace, so it wouldn't really give you anymore angle. Do you have stock nozzle pushed all the way down? It's moves up and down and side to side. If that angle is not enough, what i would recommend is just adding a couple pieces of 1/2 lock line and then reattach your stock nozzle and then you can aim it even farther down in the tank.

thanks

jason