So I have officially finished reading Saltwater Aquariums for DUMMIES and have decided to start small. Well, at least as small as the book said I should, 30 gallons. So I haven't bought an aquarium yet but I currently have a glass 15 gallon aquarium and was thinking of using this as a sump, actually I'm not sure what a sump is but I was thinking of using it to increase the actually water volume of the entire tank to 45 gallons but have the 15 gallon aquarium out of site in the bottom of the stand and keep a biological filter (or liverock?), heater in it.
So basically I'm thinking about having a 30 gallon tank on top with a canister filter that filters the water and pumps it down to the 15 gallon tank underneath. I want to fill both of them and circulate the water by using a canister filter to move the water down to the 15 gallon tank from the 30 gallon and then pump it back up to the 30 gallon tank after it has been filter/heated in the 15 gallon tank.
Will putting a heater in the 15 gallon tank keep the entire system to the set temperature? And will the 15 gallon tank kept out of sight need a light of its own?
Sorry I'm completely new.
Here's what im planning to buy to start.
-SeaClear 30 gallon regular acrylic tank
-RENA xp1 canister filter
-RENA 150watt heater <- probably need to be uped because i just had the idea of adding the 15 gallon tank
-Some type of biowheel filter (maybe liverock, this is for the 15 gallon)
-Powerhead (to get water back up to the tank)
Im also thinking that a overflow bucket (or something like that) could replace the powerhead if i used the canister filter to pump the water back up to the tank. can anyone give me any tips?
I want to get a steady/mature tank set up before I get any livestock.
Thank You, I think i like this community <3
So basically I'm thinking about having a 30 gallon tank on top with a canister filter that filters the water and pumps it down to the 15 gallon tank underneath. I want to fill both of them and circulate the water by using a canister filter to move the water down to the 15 gallon tank from the 30 gallon and then pump it back up to the 30 gallon tank after it has been filter/heated in the 15 gallon tank.
Will putting a heater in the 15 gallon tank keep the entire system to the set temperature? And will the 15 gallon tank kept out of sight need a light of its own?
Sorry I'm completely new.
Here's what im planning to buy to start.
-SeaClear 30 gallon regular acrylic tank
-RENA xp1 canister filter
-RENA 150watt heater <- probably need to be uped because i just had the idea of adding the 15 gallon tank
-Some type of biowheel filter (maybe liverock, this is for the 15 gallon)
-Powerhead (to get water back up to the tank)
Im also thinking that a overflow bucket (or something like that) could replace the powerhead if i used the canister filter to pump the water back up to the tank. can anyone give me any tips?
I want to get a steady/mature tank set up before I get any livestock.
Thank You, I think i like this community <3