Sump / plumbing

[Tylerdg]

Hello I recently acquired a 150 gallon aquarium and it has two drilled holes on the back glass, one on the far left, and one on the far right. One of these holes a little bigger than the other. I also have a 75 gallon aquarium I'm trying to turn into a sump but have no idea how to. Does anyone know how to do the plumbing to the sump and how to turn it into a sump? Any help would be appreciated thanks!

 

[SGT_York]

measure the size of the holes, likely one is for a 1" bulkhead the smaller for a 3/4." Look up a bean animal coast to coast overflow and purchase the glass and drill the third hole, It's really not very complicated, looks far harder than it really is, you'll have a high quality setup that is easy to install, run, and maintain.

 

[Tylerdg]

Thanks, will check it out how hard is it to drill a hole? The glass is about an inch thick

 

[owen386]

not to hard but cant go wrong an in instant.
You tube it and buy a kit off ebay and you should be good.
Or just get your self two bulk heads plumb it up one return and one overflow