tank leveling dilemma

[md14fish]

I am setting up a Marineland Deep Dimension tank 200 gal-The dimensions are 48x36x27H. Before filling, the tank was level.
Once filled with water and sand it is off across back of tank by about an 1/8th of an inch.
Is this a problem? Do you think I need to drain and empty and relevel?
Any advise appreciated.

 

[boilermaker1]

I dont think you need to empty it, just knock a couple wooden leveling wedges under the stand and bring the back up.

 

[Biggum]

Is it sitting on carpet? If so then I'm not so sure that I'd be too concerned about it. Most likely it will settle over time.

 

[md14fish]

Its on a hardwood floor on the main level of house.
the leveling wedges are type used in home depot "shims"

 

[Biggum]

Not being the gambling type I'd drain it down and investigate. You could try playing with the shims though and see if that works out. An 1/8th might not be too hard to make up.

 

[md14fish]

I called perfecto and they told me its not an issue as long as it is seated in the stand correctly, which it seems to be.
I also got a second opinion from aqueon and they said the same thing.