Turbofloater 1000 multi

Hockeyben51

Hockeyben51

New member
I have a turbofloater 1000 multi by aquamedic on my 75 gal tank and for some reason it is not producing foam or accumulating waste, does anyone know how i can solve this?
 
my tank has been up for like 10 months and skimmer has been on just as long, my sg: 1.024, and yes there are air buble in water column
 
If you have water up to the correct location (as outlined in directions), on proper tilt, and correct working pump, I have not idea.

I would say double check the pump (needle wheel etc). I know mine did not work correctly till I read the directions. I put a ball valve on the skimmer inlet side. Works great now.
 
Turn the black nobs on the skimmer water outputs to close off the flow some. This will cause the water level to rise higher and you should be able to foam over the top this way. (will require some adjusting obviously)
 
Has your skimmer produced waste in the past?

The only other thing I would check is the restrictor on the pump inlet. The restrictor (on mine, resembles a hose barb that threads into the pump inlet) must be in place or will not produce the correct air/water mixture.

Once you do find the problem, it could still take several hours before it begins producing foam/waste.

Good luck.
 


The only other thing I would check is the restrictor on the pump inlet. The restrictor (on mine, resembles a hose barb that threads into the pump inlet) must be in place or will not produce the correct air/water mixture.

Is there anyway you can post a picture of this? I recently bought a Turobflotor 1000 MLS on E-Bay. My tank is not set up yet so - I'm kind of curious as to what you are talking about. I found a black piece of plastic - like a "nipple" and I was wondering if this is what you are talking about. And if it is - exactly where are you saying it goes. Inside of the pump housing?

Thanks for your help.

SaltyNovice
Click to expand...
 
I canââ"šÂ¬Ã¢"žÂ¢t find any good pictures online (and mine is too buried to get at conveniently). My skimmer is several years old so they may be using different pumps, but I believe mine is an Aquabee pump. On my particular model, the intake side of the pump is almost flush to the pump case. There are internal threads on this part (maybe like 5/8 or 3/4ââ"šÂ¬Ã‚). The hose barb that you may have floating around should have a male thread to fit (with the barb end if I recall being like 3/8 or 1/2ââ"šÂ¬Ã‚), and this threads into the intake. There was a little strainer also that fits onto this hose barb.
Hope this helps.
 
what do you mean by the restricter? I have adjusted the knobs on the outlet flow and the foam gets to the top and alittle over the center of the cup but no junk will collect in the bottom of the cup becasue nothing foams over, i really need to get this figured out soon, so please help
 
<a href=showthread.php?s=&postid=6489394#post6489394 target=_blank>Originally posted</a> by Hockeyben51
anyone?
Click to expand...


I wish I could help you "HockeyBen51", but as I said I don't even have my tank set up yet. I have a FW 29 that I set it up on to see if if worked and made bubbles - but it would not skim FW - so I could just see the bubbling effect. I do know what you mean though - it didn't seem to me to be making "foam" like bubbles - mine were kind of big - but I may be wrong - I have no experience yet. I am reading your thread with interest though - 'cos I don't like the idea of spending 200.00+ and the thing doesen't work. :eek1: I'll keep reading and I hope you get your answer, but if not - maybe we can work it out together. My tank will not be set up for another few weeks though and I know you need yours to work now. I know someone on here will be able to help you out. Maybe the Auqa-Medic folks - have you gone to their website or anything yet?

SaltyNovice
 
How much livestock is in your tank??? I have a turboflotor and for the longest time I was not producing any gunk and still after 4 years still not producing as other people say they get on their skimmers.
 
i have:
2 yellow clown goby
1 2inch regal tang
1 watchman goby yello
1 velvet damsel
1 yello tail damsel
2 ocell clowns
1 marron clown
1 engineer goby
4 chromis green
and of course clean crew of shrimps, crabs, snails
 
SaltyNovice, the skimmer has worked great before and has collected plenty of gunk but right now isn't really doing that much and i find that strange.I have been to the aquamedic site and i haven't found it useful
 
Maybe it's time to take the pump out and clean it out thoroughly. Check to make sure there is no restriction of the air inlet anywhere also.

D.
 
You must log in or register to reply here.

Similar threads

PI Guy
tunze multi-controller question
Replies
2
Views
283
Jposch
J
R
BULK REEF SUPPLY 5 Stage Premium Plus 150 GPD Water Saver RO/DI System
Replies
8
Views
204
Reefing102
Reefing102
G
Need help updating and setting up DA Archon setup
Replies
1
Views
182
griss
griss
Q
Aquarium Chiller Compressor kicks on and back off
Replies
0
Views
107
Quiltalotyl
Q
Nanook
Reefbreeder Photon V2+ 50” fixtures FS (5 of them)!
Replies
3
Views
176
Nanook
Nanook
Back
Top