jayelblock
New member
Hello All,
I am selling some equipment. I buy most of my equipment used, and everything except the ballasts has a bit of damage, but everything works exactly as it should. I have noted all areas of concern as fully as possible.
2 x Reeflex 250W Cube Ballasts with Vertical 3-Prong Plug Adapters--$60 each
Purchased new one year ago and used 4 hours per day each.
Each comes with original box. Adapters are three-prong vertical and fit reflectors below.
2 x Lumenarc Stealth Mini MH Reflectors for use with 250W DE HQI Bulbs--$50 each
Vented, but no active cooling. 14.5" x 14.5"
Reflector #1 has a Ushio 20K bulb that is a year old w/4 hours of burn per day
--Missing two screws from frame (does not affect stability or performance)
--Plug has been spliced to be compatible with Reeflex Cube ballast
Reflector #2 has a 20K XM bulb (I think) that is six months old w/4 hours of burn per day
--Missing one screw from frame
--Original owner drilled holes in frame of pendant for some reason as pictured
--Plug has been spliced to be compatible with Reeflex Cube ballast
Will sell reflectors and ballasts together for $200.
<a href="http://www.flickr.com/photos/54938277@N03/10893408234/" title="sale items 004 by jayelblock, on Flickr"><img src="http://farm8.staticflickr.com/7366/10893408234_097e90032f.jpg" width="500" height="375" alt="sale items 004"></a>
CPR Aquafuge Large--$40
Approximately 25" x 11.5" x 4" = 5g
This is the original with no add-on parts. Typical scratches associated with used acrylic.
Comes with Rio 400 pump.
--Missing one of the top leveling screws as pictured. Since fuge hangs from overflow and return pipes, this does not affect capacity to balance fuge. It's really the bottom set screws that hold the position, and both of those are attached.
<a href="http://www.flickr.com/photos/54938277@N03/10893462693/" title="sale items 007 by jayelblock, on Flickr"><img src="http://farm6.staticflickr.com/5539/10893462693_060ed1779f.jpg" width="500" height="375" alt="sale items 007"></a>
Aqua One Panaorama Bookshelf Tank--$20
60 x 20 x 25 cm (23.5" x 8" x 10") = 8g
This is a very pretty bow front rimless bookshelf tank from a UK company. Unusual, and now out of production. Needs a bit of scrubbing, but is 75% clean.
Comes with all original parts including:
--Two piece glass cover
--Cover support clips
--Foam leveling pad
The bad news:
--Factory defect to black background which creates a lighter spot when lit. You could probably sharpie this in, but I didn't try it
--Small flea bite chip to glass cover.
--Significant scratch in viewing area. If scratches drive you mad, don't buy this. I'm unable to get a good picture of the scratch, but it is vertical and 1.75" long. It is located about midway up from the bottom on the right third of the tank. If you follow the outlet from the background of my picture half way down the tank and to the right a few inches, you'll be in the neighborhood.
<a href="http://www.flickr.com/photos/54938277@N03/10893301856/" title="sale items 002 by jayelblock, on Flickr"><img src="http://farm4.staticflickr.com/3814/10893301856_3870722870.jpg" width="500" height="375" alt="sale items 002"></a>
Maxi-Jet 1200 Submersible Pump/Power Head--$10
Older version. Comes with original box, instructions, and a ridiculous number of little parts. Nothing wrong with this, to the best of my knowledge. Sorry for the blurry pic, but I was too lazy to reshoot this one.
<a href="http://www.flickr.com/photos/54938277@N03/10893428064/" title="sale items 001 by jayelblock, on Flickr"><img src="http://farm4.staticflickr.com/3719/10893428064_85f4c10950.jpg" width="375" height="500" alt="sale items 001"></a>
More good crap to come, including a 1/10 hp chiller, some Par 38 type bulbs, and whatever else I can stir up the energy to clean, photograph, and post. I'm in the South Tulsa/Jenks area.
I am selling some equipment. I buy most of my equipment used, and everything except the ballasts has a bit of damage, but everything works exactly as it should. I have noted all areas of concern as fully as possible.
2 x Reeflex 250W Cube Ballasts with Vertical 3-Prong Plug Adapters--$60 each
Purchased new one year ago and used 4 hours per day each.
Each comes with original box. Adapters are three-prong vertical and fit reflectors below.
2 x Lumenarc Stealth Mini MH Reflectors for use with 250W DE HQI Bulbs--$50 each
Vented, but no active cooling. 14.5" x 14.5"
Reflector #1 has a Ushio 20K bulb that is a year old w/4 hours of burn per day
--Missing two screws from frame (does not affect stability or performance)
--Plug has been spliced to be compatible with Reeflex Cube ballast
Reflector #2 has a 20K XM bulb (I think) that is six months old w/4 hours of burn per day
--Missing one screw from frame
--Original owner drilled holes in frame of pendant for some reason as pictured
--Plug has been spliced to be compatible with Reeflex Cube ballast
Will sell reflectors and ballasts together for $200.
<a href="http://www.flickr.com/photos/54938277@N03/10893408234/" title="sale items 004 by jayelblock, on Flickr"><img src="http://farm8.staticflickr.com/7366/10893408234_097e90032f.jpg" width="500" height="375" alt="sale items 004"></a>
CPR Aquafuge Large--$40
Approximately 25" x 11.5" x 4" = 5g
This is the original with no add-on parts. Typical scratches associated with used acrylic.
Comes with Rio 400 pump.
--Missing one of the top leveling screws as pictured. Since fuge hangs from overflow and return pipes, this does not affect capacity to balance fuge. It's really the bottom set screws that hold the position, and both of those are attached.
<a href="http://www.flickr.com/photos/54938277@N03/10893462693/" title="sale items 007 by jayelblock, on Flickr"><img src="http://farm6.staticflickr.com/5539/10893462693_060ed1779f.jpg" width="500" height="375" alt="sale items 007"></a>
Aqua One Panaorama Bookshelf Tank--$20
60 x 20 x 25 cm (23.5" x 8" x 10") = 8g
This is a very pretty bow front rimless bookshelf tank from a UK company. Unusual, and now out of production. Needs a bit of scrubbing, but is 75% clean.
Comes with all original parts including:
--Two piece glass cover
--Cover support clips
--Foam leveling pad
The bad news:
--Factory defect to black background which creates a lighter spot when lit. You could probably sharpie this in, but I didn't try it
--Small flea bite chip to glass cover.
--Significant scratch in viewing area. If scratches drive you mad, don't buy this. I'm unable to get a good picture of the scratch, but it is vertical and 1.75" long. It is located about midway up from the bottom on the right third of the tank. If you follow the outlet from the background of my picture half way down the tank and to the right a few inches, you'll be in the neighborhood.
<a href="http://www.flickr.com/photos/54938277@N03/10893301856/" title="sale items 002 by jayelblock, on Flickr"><img src="http://farm4.staticflickr.com/3814/10893301856_3870722870.jpg" width="500" height="375" alt="sale items 002"></a>
Maxi-Jet 1200 Submersible Pump/Power Head--$10
Older version. Comes with original box, instructions, and a ridiculous number of little parts. Nothing wrong with this, to the best of my knowledge. Sorry for the blurry pic, but I was too lazy to reshoot this one.
<a href="http://www.flickr.com/photos/54938277@N03/10893428064/" title="sale items 001 by jayelblock, on Flickr"><img src="http://farm4.staticflickr.com/3719/10893428064_85f4c10950.jpg" width="375" height="500" alt="sale items 001"></a>
More good crap to come, including a 1/10 hp chiller, some Par 38 type bulbs, and whatever else I can stir up the energy to clean, photograph, and post. I'm in the South Tulsa/Jenks area.
