Logzor
New member
My Tunze alarm just went off....I cleaned it completely a month or two ago. I soaked it in vinegar overnight. I was surprised to find that the base of the prop was calcified again already.
I know how to fix the issue as per Randy's article. I am concerned about my Ehiem pump. How do you remove the prop to see if there is an issue? Do these pump frequently clog?
I tested my parameters and I am not sure why my pump calcified so fast.
10.5 DKH w/ELOS
390 ppm Calcium (tested a couple days ago) w/Salifert
1260 ppm Magnesium w/Salifert
PH has been on the high side at 8.3-8.4
Is it simply that my PH is too high?
I know how to fix the issue as per Randy's article. I am concerned about my Ehiem pump. How do you remove the prop to see if there is an issue? Do these pump frequently clog?
I tested my parameters and I am not sure why my pump calcified so fast.
10.5 DKH w/ELOS
390 ppm Calcium (tested a couple days ago) w/Salifert
1260 ppm Magnesium w/Salifert
PH has been on the high side at 8.3-8.4
Is it simply that my PH is too high?
Last edited: