Wga54g

[lunner]

Hi,

I am not sure what did I wrong when connecting a Linksys WGA54G to the P3ex.

My Router setting:
Local Network:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
DHCP Server: Enabled
Start IP Address: 192.168.1.100
End IP Address: 192.168.1.114
Router:
Login Type: Automatic Configuration - DHCP
IP Address: 64.131.225.248
Subnet Mask: 255.255.252.0
Default Gateway: 64.131.224.1
DNS 1: 207.69.188.185
DNS 2: 207.69.188.186
DNS 3: 207.69.188.187
MTU: 1500


WGA54G settings:
IP address = 192.168.1.106
Default Gateway = 192.168.1.1
Subnet Mask = 255.255.255.0

When I have the WGA54G connected to the router, I could log on the WGA54G by 192.168.1.106. But when I disconnect it from the router, I couldn't log back on.

On the DHCP Active IP Table
DHCP Server IP Address: 192.168.1.1
Linksys WGA54G 192.168.1.106

I did set the router for MAC Address Filter.

Any help would be great.
Thanks

 

[unbreakable]

do you have the wga54g connected to a modem? i usually turn DHCP off and assign the ip locally. It could be because of your default gateway, but im not a computer guy at all. I *think* the linksys has to have the default gateway to the modem and you have to open the ports and assign the IP that the profilux uses and then later look for the dns settings to access remotely

 

[lunner]

No it is not connected to a modem.

 

[lunner]

Silly me. I mistyped P3ex's MAC address in my new router's MAC table... Working flawlessly now!