raidendex
Well-known member
Will be moving in a while... and will likely won't be able to take the tank with my, so would like to get this started early and post the whole system for now. If sells it sells, otherwise will start parting out corals/fish probably in 5-6 months.
Looking for $5000 for the whole system, which with 100 different corals inside would likely just pay for their original frags and most are fairly large colonies at the moment.
Everything I have was bought new, may not be new anymore, but the only owner
Tanks:
180g AGA display tank (based on http://reefcentral.com/forums/showthread.php?t=2372543 installed in late Jan 2014, bought new). Maybe a scratch somewhere, but for the most part it should be like new. Black silicone.
120g AGA sump - bought it in April of 2011 I believe. It's a sump, but should also be fairly scratch free. Clear silicone.
Chaeto and fern caulrepa in the sump grown by LED flood light.
Stand:
DIY 4' tall wood stand, built like a tank. Stand looks decent to me, canopy is a bit frankenstein looking, but not too bad as well ;p The outside of the stand's finish is screwed on to the frame, so this can be replaced for something else if needed fairly easy. Two big doors that give access to whole stand without middle brace.
Powerheads:
2x MaxSpect Gyre XF150 - bought first when they came out (upgraded to new style inside magnet as well as motor block/controller), second was bought after they released latest version. All spare parts are still available and unused.
2x Neptune WAV with 1 Link module - got it around Dec 1, 2015.
1x Koralia Evo 1400 in the sump.
Return pump:
Sicce 5.0
Overflow:
Double 1" hang on overflow box, set up in herbie configuration.
Heaters:
Eheim Ebo Jager 300w.
Ranco controller for them.
Skimmer:
SRO 3000 internal.
Lights:
Day - ATI Sunpower 60" x8 bulb with mostly ATI bulbs, few months old as of now.
Night - Neptune lunar simulation module with 5 LED string.
Controller:
Apex Gold package - Full controller, display, 8 outlet power bar, ph/temp probes.
BRS lab grade ph and orp probes.
2x 8 outlet power bars (for a total of 3).
Doser:
2x Neptune DOS.
2x 5g containers for Alk/Ca.
1g bottle for Mag.
About 6 other 1g containers for mixing.
Reactor:
2x MR1 NextReef for carbon and gfo.
Additives:
5g buckets of BRS Ca, Mag, Alk, Carbon. Carbon is full, others are about half way.
1g container of BRS GFO.
RO/DI:
BRS based 6 stage unit. Originally it was 4 stage, but I've added 2 more canisters for - sediment filter, carbon block, carbon block, membrane, di resin, di resin. As of right now I have 3 sets of replacements except for the membrane, that was replaced in April 2015 along with the rest of filters.
Misc:
About 20 different large filter socks in various micron ratings from 1 to 200. Not currently used.
5x 35g yellow brute cans if needed for the move
2x 55g barrels for water storage/salt mixing
Fish:
DTYellow tang
Hippo tang
Sailfin tang
Gray with orange fins tang.... tomini or something
2x Mai tai clownfish
Algae blenny
Starry blenny
Midas blenny
Carpenter's Flasher Wrasse
Sump
Gold stripe maroon clown
Domino damsel
Snails, hermits, pincushion urchin.
Also available 3x pistol shrimp, 2 more mai tai clowns, some gray tang from the frag tank.
Corals:
http://reef.verynotgood.info/ - pictures are few months out of date, but list of corals is correct.
Rock:
Display has 5 large rocks of BRS Pukani - 100-150 lbs.
Sump has another 100ish lbs of fiji rock.
In addition can throw in frag system consisting of 60g 12" tall drilled display tank, 75g sump, tunze silence return pump, ranco temp controller with 300w heater, tunze 6095 x2 powerheads with basic tunze controller. ATI 8 bulb 4' powermodule. 80ish lbs of pukani rock.
Can't help with transport of anything, but can help load etc.
Looking for $5000 for the whole system, which with 100 different corals inside would likely just pay for their original frags and most are fairly large colonies at the moment.
Everything I have was bought new, may not be new anymore, but the only owner
Tanks:
180g AGA display tank (based on http://reefcentral.com/forums/showthread.php?t=2372543 installed in late Jan 2014, bought new). Maybe a scratch somewhere, but for the most part it should be like new. Black silicone.
120g AGA sump - bought it in April of 2011 I believe. It's a sump, but should also be fairly scratch free. Clear silicone.
Chaeto and fern caulrepa in the sump grown by LED flood light.
Stand:
DIY 4' tall wood stand, built like a tank. Stand looks decent to me, canopy is a bit frankenstein looking, but not too bad as well ;p The outside of the stand's finish is screwed on to the frame, so this can be replaced for something else if needed fairly easy. Two big doors that give access to whole stand without middle brace.
Powerheads:
2x MaxSpect Gyre XF150 - bought first when they came out (upgraded to new style inside magnet as well as motor block/controller), second was bought after they released latest version. All spare parts are still available and unused.
2x Neptune WAV with 1 Link module - got it around Dec 1, 2015.
1x Koralia Evo 1400 in the sump.
Return pump:
Sicce 5.0
Overflow:
Double 1" hang on overflow box, set up in herbie configuration.
Heaters:
Eheim Ebo Jager 300w.
Ranco controller for them.
Skimmer:
SRO 3000 internal.
Lights:
Day - ATI Sunpower 60" x8 bulb with mostly ATI bulbs, few months old as of now.
Night - Neptune lunar simulation module with 5 LED string.
Controller:
Apex Gold package - Full controller, display, 8 outlet power bar, ph/temp probes.
BRS lab grade ph and orp probes.
2x 8 outlet power bars (for a total of 3).
Doser:
2x Neptune DOS.
2x 5g containers for Alk/Ca.
1g bottle for Mag.
About 6 other 1g containers for mixing.
Reactor:
2x MR1 NextReef for carbon and gfo.
Additives:
5g buckets of BRS Ca, Mag, Alk, Carbon. Carbon is full, others are about half way.
1g container of BRS GFO.
RO/DI:
BRS based 6 stage unit. Originally it was 4 stage, but I've added 2 more canisters for - sediment filter, carbon block, carbon block, membrane, di resin, di resin. As of right now I have 3 sets of replacements except for the membrane, that was replaced in April 2015 along with the rest of filters.
Misc:
About 20 different large filter socks in various micron ratings from 1 to 200. Not currently used.
5x 35g yellow brute cans if needed for the move
2x 55g barrels for water storage/salt mixing
Fish:
DTYellow tang
Hippo tang
Sailfin tang
Gray with orange fins tang.... tomini or something
2x Mai tai clownfish
Algae blenny
Starry blenny
Midas blenny
Carpenter's Flasher Wrasse
Sump
Gold stripe maroon clown
Domino damsel
Snails, hermits, pincushion urchin.
Also available 3x pistol shrimp, 2 more mai tai clowns, some gray tang from the frag tank.
Corals:
http://reef.verynotgood.info/ - pictures are few months out of date, but list of corals is correct.
Rock:
Display has 5 large rocks of BRS Pukani - 100-150 lbs.
Sump has another 100ish lbs of fiji rock.
In addition can throw in frag system consisting of 60g 12" tall drilled display tank, 75g sump, tunze silence return pump, ranco temp controller with 300w heater, tunze 6095 x2 powerheads with basic tunze controller. ATI 8 bulb 4' powermodule. 80ish lbs of pukani rock.
Can't help with transport of anything, but can help load etc.
