some are having a problem opening up the link so here is a list:
Complete System Setup, Due to unfortunate changes in life I am forced to get rid of my 125G AGA Aquarium. I have I some OLD Picks of the system during the initial phase of setting up the system where you can see the Tank, Stand, Canopy, Lighting and some Live rock. since then I added the ASM G-4XX, AquaController, ATO, Kalk Reactor, LiveStock and More. There Is Plenty of Coraline Alge and more Just click on my "Home Page, little red house" Asking $1700.
125G aga (Not Reef Ready) with a single twin HOB Overflow.
Red Oak Stand and Canopy with Cabinet Grade Doors and Panels
Approx 150lbs Live Rock and 120lbs Live Sand
Sump: EcoSystem 3616 Sump/Fuge Modified/Repaired
Skimmer:ASM G-4XX With 9month old Sedra 15000 NW, Recirculating and Gatevalve Mods in Own dedicated 20g aga sump.
Lighting:2-250W 14k & 1-175w 20k Metal Halides. (bulbs 7 months old )
AquaController JR with DC8, Temp Probe, PH Probe (PH Probe needs calibrated (Very Simple) or possible replaced. instruction manual included.
Aquatic Designs Kalk Reactor feed through
ATO With duel float switch, aqualifter pump and 20g AGA top off container and float.
Mag 9.5 Return pump, Hard Plumbing with 2 DIY Penductors,
2- Seio M1500 Pumps
R/O-DI Filter with all New In Box Filters including Membrane and Backflush kit.
Water Change Container: Brute Force With Float, hard plumbing and Mag 7 recircluating pump.
Live Stock: Powder Blue Tang 2.5Yrs Old
Purple Tang 1.5Yrs Old
Yellow Tang 1.5Yrs Old
Chromis(S)
2- SeaBae Clowns 1. 6.5Yrs Old, 1. 1.5yrs old
Green Brittle starfish 6.5 Yrs Old
Blue Linka Starfish 2.5Yrs old
Lots and Lots of Leathers
Green polops
Mushrooms
Cleanup Crew
Also Included but not on or running on the tank is:
Large sterelite container of skeleton coral, emporer aquatics 25w UV sterilizer(needs new bulb and Crystal sleve, on o-Ring kit) $325 value, about 150-200 lava rock, wet/dry filter with bioballs, various pumps, testing equipment, fittings, buckets and so so so much more.
I will assist in tear down and also assist in setup if in reasonable distance, bring lots of help and multiple trucks or a small u-hual as this is a very heavy large system, and has a working foot print of 73"L X 31"W X ? tall
Asking $1700.00 well over $4500 in running system plus all the extras estimated total cost of everything $7500+.
