just dave
11th in '11
I have a used 125 aquarium (72x18x22) with stand, canopy, sump, skimmer, reflector with sockets for three metal halides (SE) and 96w actinics. The Tank is drilled with two overflows offset from each corner. The stand and canopy are oak stained rosewood with a satin finish.
The aquarium is NOT mine or the shops. It is Danny's ( a guy that use to work at the shop.) He acquired it but has no time to set it up. I agreed to store it for him but now that part of the store is in my "project lists" sights and it needs to go. He wants 400.00 for it.
The price is firm and in cash.
It is at the shop in storage but is positioned in a way that you can't see the front of the stand. We put it in that way so it wouldn't get banged and scratched. You will not be able to pull it out to look at the front. If you buy it you will need to have your own help to move and load it and it must not be during business hours.
What I know ( or think I know ) about it is as follows.
It seems to be a Perfecto Prestige Line cabinet and stand.
The light system seems to be a Coralife unit (No bulbs or ballasts.)
The skimmer is an ASL unit.
The sump is a moderate sized Wet dry unit but I have no idea who made it (no pumps.)
Danny told me that one ( if not both ) overflows need to be resealed. It seams that there is a leak and this means that in a power outage or pump shut down the water would drain down to the top of the stand pipes. It seems that the sump is large enough to hold the extra water but I would recommend resiliconing the seams. Not a big deal as the overflow seams are not a structural part of the tanks integrity.
The tank was run with three halides and one was positioned above the center brace. The center brace is intact but distorted due to the heat.
You can come by during business hours and look at it.
The aquarium is NOT mine or the shops. It is Danny's ( a guy that use to work at the shop.) He acquired it but has no time to set it up. I agreed to store it for him but now that part of the store is in my "project lists" sights and it needs to go. He wants 400.00 for it.
The price is firm and in cash.
It is at the shop in storage but is positioned in a way that you can't see the front of the stand. We put it in that way so it wouldn't get banged and scratched. You will not be able to pull it out to look at the front. If you buy it you will need to have your own help to move and load it and it must not be during business hours.
What I know ( or think I know ) about it is as follows.
It seems to be a Perfecto Prestige Line cabinet and stand.
The light system seems to be a Coralife unit (No bulbs or ballasts.)
The skimmer is an ASL unit.
The sump is a moderate sized Wet dry unit but I have no idea who made it (no pumps.)
Danny told me that one ( if not both ) overflows need to be resealed. It seams that there is a leak and this means that in a power outage or pump shut down the water would drain down to the top of the stand pipes. It seems that the sump is large enough to hold the extra water but I would recommend resiliconing the seams. Not a big deal as the overflow seams are not a structural part of the tanks integrity.
The tank was run with three halides and one was positioned above the center brace. The center brace is intact but distorted due to the heat.
You can come by during business hours and look at it.
