Trump
New member
Well I have decided on just about everything and have officially started up the process. I plan to use some older equipment I had as well as some new led lights.
Tank 15 gal show 24.5''w 16"h 8.5"d back wall drilled
the filter will be a 10gal tank divided with at least 3 bays
inlet area bottom feed to overflow onto mechanical filter and
into a heater and return pump secton also houseing the protien skimmer
CPR sr2 skimmer useing a rio 600
rio 2500 for return flow
planning on doing a wall to hide some of the drain and inlet plumbing
useing a diy cree led kit 24.25" heat sink with 12 led 3 CW 3 NW and 6 RB
waiting to see if optics will be needed
useing an old pine tv stand to house the filter while raising the tank to higher level for viewing.
Will get pictures on tomarrow. Currently fresh water testing the plumbing, and laying out the led set up.
Tank 15 gal show 24.5''w 16"h 8.5"d back wall drilled
the filter will be a 10gal tank divided with at least 3 bays
inlet area bottom feed to overflow onto mechanical filter and
into a heater and return pump secton also houseing the protien skimmer
CPR sr2 skimmer useing a rio 600
rio 2500 for return flow
planning on doing a wall to hide some of the drain and inlet plumbing
useing a diy cree led kit 24.25" heat sink with 12 led 3 CW 3 NW and 6 RB
waiting to see if optics will be needed
useing an old pine tv stand to house the filter while raising the tank to higher level for viewing.
Will get pictures on tomarrow. Currently fresh water testing the plumbing, and laying out the led set up.