arthurdent510
New member
Ok, fish are all gone, so I'm taking the tank down now. It's being drained now, so you can come over as early as Saturday to pick things up. This is what I have:
150g peninsula tank - 5/8" glass, 57"x2'x2' Good shape, no visible scratches that I can see. I have a stand and hood for it, the stand is one that I built out of 2x4 and 2x6. I was going to make a skin for it, just never got around to it. It's heavy..... took 4 of us to get it in my house. Includes a 30g sump and all the plumbing. The tank is drilled in the bottom, with the overflow in the middle-rightish. Asking $400
G3 skimmer, modded for direct feed. So the return line dumps directly into the body of the skimmer. I'll even include my custom made mountain dew pop bottle muffler! O-rings are about a year old, needle wheel looks to be in good shape still. $50
Jabeo Rw-8 - this is the wireless version of the wp-25, I believe. 2-3 months old, no issues with it. $40
Little Giant 3-MDQX-SC external pump - 1100gph. Not sure of the age on the pump, but it's less then 2 years and runs good and silent. $140
2 little fish phosban reactor w/ maxijet 600 - $25
My custom build led's - I have 2 fixtures of 28 3watt led's per fixture, mounted to a Maker's led 12" heatsync. If you were out at the led demo for azfrag last month you saw one of them. Each fixture has 2 Meanwell eln-60-48d drivers. Ask if you have questions on these... it'd be best if you knew what you were getting into, they're not exactly plug and play, but the fixtures are complete and ready to go. You will need a way to interface it to an apex or some other controller to control dimming. In total, it's about 84 watts per fixture. The led mix for each one is 10 royal blue, 10 cool white, 4 blue, 2 uv, 1 red, and 1 green. They are mostly cree led's that were purchased from rapid. Asking $225 per fixture.
30g Brute can w/ lid, was used to mix salt water - $5
Eheim Heaters - a 250w and a 50w. $10 for both
Tsunami AT-1 ATO - The suction cup on the probe no longer sticks, so I've epoxied a magnet to the suction cup and use magnets instead. Works much better now, doesn't move at all. I'll throw in a maxijet 900 and hose that I used on it. $25
Pictures will soon follow!
150g peninsula tank - 5/8" glass, 57"x2'x2' Good shape, no visible scratches that I can see. I have a stand and hood for it, the stand is one that I built out of 2x4 and 2x6. I was going to make a skin for it, just never got around to it. It's heavy..... took 4 of us to get it in my house. Includes a 30g sump and all the plumbing. The tank is drilled in the bottom, with the overflow in the middle-rightish. Asking $400
G3 skimmer, modded for direct feed. So the return line dumps directly into the body of the skimmer. I'll even include my custom made mountain dew pop bottle muffler! O-rings are about a year old, needle wheel looks to be in good shape still. $50
Jabeo Rw-8 - this is the wireless version of the wp-25, I believe. 2-3 months old, no issues with it. $40
Little Giant 3-MDQX-SC external pump - 1100gph. Not sure of the age on the pump, but it's less then 2 years and runs good and silent. $140
2 little fish phosban reactor w/ maxijet 600 - $25
My custom build led's - I have 2 fixtures of 28 3watt led's per fixture, mounted to a Maker's led 12" heatsync. If you were out at the led demo for azfrag last month you saw one of them. Each fixture has 2 Meanwell eln-60-48d drivers. Ask if you have questions on these... it'd be best if you knew what you were getting into, they're not exactly plug and play, but the fixtures are complete and ready to go. You will need a way to interface it to an apex or some other controller to control dimming. In total, it's about 84 watts per fixture. The led mix for each one is 10 royal blue, 10 cool white, 4 blue, 2 uv, 1 red, and 1 green. They are mostly cree led's that were purchased from rapid. Asking $225 per fixture.
30g Brute can w/ lid, was used to mix salt water - $5
Eheim Heaters - a 250w and a 50w. $10 for both
Tsunami AT-1 ATO - The suction cup on the probe no longer sticks, so I've epoxied a magnet to the suction cup and use magnets instead. Works much better now, doesn't move at all. I'll throw in a maxijet 900 and hose that I used on it. $25
Pictures will soon follow!
