180 gallon tank..need powerhead suggestions

[AkaSlyGuy]

I have a 180 gallon (72x24x24) mixed reef, but heavier on the sps side than sps/spofties. I currently have 2 vortech mp40s, one on each end, but would like to add more flow. Any suggestions on what Tunze powerhead(s) would be the best fit?

Also, I am considering selling my mp40s and going with all Tunze....what would you suggest in that case? If it matters I have an Apex controller. I have no experience with Tunze powerheads.

Thanks

 

[rvitko]

A pair of 6105's would be the right choice, I would use the 24V setting. I would try both of the flow housings, narrow flow will reach 7ft by 2ft and wide about 5ft by 3ft. For the most part for your size tank the wide flow will channel and should reach the full length but will be more diffuse.

 

[AkaSlyGuy]

Thanks Roger. Are you recommending the pair of 6105's in addition to the vortech's or in place of them?

Joe

 

[rvitko]

In place of them, they will definitely do the job, I think you will be pleasantly surprised when you see the difference.

 

[AkaSlyGuy]

Possible stupid question, would I need to order any special magnet mounts for .5 inch glass, or are the ones provided good for that?

 

[rvitko]

Stock magnets are for up to .6"