pk1
Active member
Hello Folks,
Been a long time since I've posted or been in the hobby - kids and life have eaten up all my time. I'm moving and need to sell my in wall set up. Main tank is a 180G reef ready, in good shape with overflows. No major scratches - it has holes drilled for 3/4 inch bulkheads on one side that were used as a closed loop at one point and a surge system at another, besides that it's stock. There is a chip in one of these holes - it is superficial and the tank ran for years with it.
Included is a 125 custom sump with dividers - right side is a compartment for the overflows to feed into, middle is the return section, and the left a large area for a slow flow refugium. This tank is drilled with a 1-1/4 bulkhead drain for the return pump and a 3/4 bulkhead for quick drain on the back panel, and 3/4 bulkhead on the right panel for skimmer feed. The sump fits perfectly under the stand which is included, but I'm just tossing it in if the buyer wants it - it may be too custom fit to work for you.
There are also two 55 gallon tanks that are drilled on one end with two 3/4 bulkheads in each. These tanks were used as a water mixing station and for kalk top off water. on the other end is a hole with a float valve where the RO/DI tube fed right into.
The whole system was built for easy maintenance - all 3 sections of the sump can be drained with the turn of a ball valve. The 55 gallon tanks can be mixed with a mag 12 which is what the system was designed for. Turn a few valves and it mixes either; one 55 gallon, both together, or pumps the water into the main sump for a water change.
I'd like to get 650$ for the 4 tanks and all plumbing pictured. Wall trim also. **Buyer has to bring the muscle, and it needs to go by 6/10. Please don't inundate the post with requests to split, PM me.
Feel free to browse my post history for pictures of it running - it was fun when it lasted!
Been a long time since I've posted or been in the hobby - kids and life have eaten up all my time. I'm moving and need to sell my in wall set up. Main tank is a 180G reef ready, in good shape with overflows. No major scratches - it has holes drilled for 3/4 inch bulkheads on one side that were used as a closed loop at one point and a surge system at another, besides that it's stock. There is a chip in one of these holes - it is superficial and the tank ran for years with it.
Included is a 125 custom sump with dividers - right side is a compartment for the overflows to feed into, middle is the return section, and the left a large area for a slow flow refugium. This tank is drilled with a 1-1/4 bulkhead drain for the return pump and a 3/4 bulkhead for quick drain on the back panel, and 3/4 bulkhead on the right panel for skimmer feed. The sump fits perfectly under the stand which is included, but I'm just tossing it in if the buyer wants it - it may be too custom fit to work for you.
There are also two 55 gallon tanks that are drilled on one end with two 3/4 bulkheads in each. These tanks were used as a water mixing station and for kalk top off water. on the other end is a hole with a float valve where the RO/DI tube fed right into.
The whole system was built for easy maintenance - all 3 sections of the sump can be drained with the turn of a ball valve. The 55 gallon tanks can be mixed with a mag 12 which is what the system was designed for. Turn a few valves and it mixes either; one 55 gallon, both together, or pumps the water into the main sump for a water change.
I'd like to get 650$ for the 4 tanks and all plumbing pictured. Wall trim also. **Buyer has to bring the muscle, and it needs to go by 6/10. Please don't inundate the post with requests to split, PM me.
Feel free to browse my post history for pictures of it running - it was fun when it lasted!
Last edited by a moderator:
