sk8ter20art
New member
I have the 2016 apex, and 2 reefbrite Tech LEDS (all blue), and reefbrite interface (new model no manual/controlled switch).
I created 4 profiles for Ramp: sunrise, sunset, moonlight, daytimeblue
then set varspd outlet 3+4 to advanced.
Set OFF
If Time 10:01 to 12:00 Then sunrise
If Time 20:00 to 22:00 Then sunset
If Time 22:01 to 10:00 Then moonlight
If Time 12:01 to 20:00 Then daytimeblue
I dropped both varspd 3 and 4 tiles down, placed in auto. outlet that leds are driven from is always on. during each appropriate time frame the varspd tiles show the correct profile for that time of day.
The problem is i am getting no dimming the lights are on 100%.
trying to run at 10% at night and 100% during the day, and ramp for sunrise/sunset.
Is there any further way to determine if the problem is in the apex code/hardware or the interface hardware.:headwallblue:
I created 4 profiles for Ramp: sunrise, sunset, moonlight, daytimeblue
then set varspd outlet 3+4 to advanced.
Set OFF
If Time 10:01 to 12:00 Then sunrise
If Time 20:00 to 22:00 Then sunset
If Time 22:01 to 10:00 Then moonlight
If Time 12:01 to 20:00 Then daytimeblue
I dropped both varspd 3 and 4 tiles down, placed in auto. outlet that leds are driven from is always on. during each appropriate time frame the varspd tiles show the correct profile for that time of day.
The problem is i am getting no dimming the lights are on 100%.
trying to run at 10% at night and 100% during the day, and ramp for sunrise/sunset.
Is there any further way to determine if the problem is in the apex code/hardware or the interface hardware.:headwallblue:
