milhouse74
New member
What lighting are you using for SPS? What flow do you have? Loking for specs on 30 Cube setups.
30 Cube owners
- Thread starter milhouse74
- Start date
milhouse74
New member
I have 2 maxi 900's with hydors and a 600 without one and the return from my hang on back refugium, a CPR.
milhouse74
New member
I use a 250 20K and it seems to taper off a lot at the bottom to being darker, did you find that is it why you changed back?
reefknight
New member
I have a PFO metal halide with power compacts pendant hanging twelve inches from the surface. PC's equal 56W of dual actinic and the metal halide is a 250W 10k Ushio powered by an Ice Cap ballast.
As far as flow, my tank has an internal overflow. The return pump is a Pan World 30 which feeds a SCWD. The outputs from the SCWD are plumbed to bulkheads on the interior of the overflow box. Attached to the overflow box are two Loc Lines split to make four outputs. These are staggered so I have switching current at seperate levels about every seven seconds. Tank is rather new , so we'll see howit works in the long run. Good luck.
Bill
As far as flow, my tank has an internal overflow. The return pump is a Pan World 30 which feeds a SCWD. The outputs from the SCWD are plumbed to bulkheads on the interior of the overflow box. Attached to the overflow box are two Loc Lines split to make four outputs. These are staggered so I have switching current at seperate levels about every seven seconds. Tank is rather new , so we'll see howit works in the long run. Good luck.
Bill
I have a 37g cube with a pendant over it. It has a 250w SE MH bulb with two 32w PC's. Originally I had a hamilton 14k bulb in it. I just changed to a 12k Reeflux. I don't really like it so I plan on changing back to the Hamilton. Just suits my tastes better.
By the way, love your screen name. Typically I'm milhouse74 anywhere else, but I got here early enough to be just plain Milhouse!
By the way, love your screen name. Typically I'm milhouse74 anywhere else, but I got here early enough to be just plain Milhouse!
spsdude
New member
I have a Current Orbit 24 inch lighting system on my 30 gallon. It has 4 lunar lights, two 65 watt actinic pcs and one 150 watt 10k mh. For water movement I use two maxijet 1200s and two maxijets 900s hooked up to a Redsea pro wavemaker. Also using a Remora skimmer. Currently I have no sump but have one being make to fit under the Oceanic stand.
milhouse74
New member
spsdude: will you drill or external overflow?
milhouse74
New member
You like the MCE600? Have any pics of it hanging on the tank? I have seriously considered it.
