300 gal $3500 or Part Out

[soni]

Racing bug bit me and keeping up with my M3 requires the tank sell.

I live in avondale but office is in Chandler for your east side folks. Once live stock is gone I can bring any of the small things that way.

Tank Part Out:

Tenecor 300 gallon 96x24x30. Black Acrylic Stand about 3 years old. $800 in plumbing. 40 Gal Sump. Minor scratches but easy to buff out. Comes with 55gal Display Fuge with stand and 2 large UV filters (needs bulbs). $1200

200 LBS of very establish LR. $2/lb or $350. If you buy all the LR Iââ"šÂ¬Ã¢"žÂ¢ll throw in what little coral is in the tank. Some zoos, couple frags and some galaxia
6in Hippo Tang. $40. Has a small bit of head erosion under 1 eye. Due to vitamin deficiency from previous owner but is going away.

3in Yellow tang $10
1.5in six line. $10
2in Conch. $5
Blue Linkia (5years old). $20
Purple Beaded Sand Sifting Star about 4in across. $15
Lunar wrasse 4in. $20
Picasso Trigger 6in. $20
Niger Trigger 3in. $10

2x 400w Hamilton Reefstar Pendants w/ 14k bulb. 1yr old. Bulbs 1month old $200 each

Lightrail 3.5 w/ extra lamp kit and 8ft of track. $200

ASM G4. Has sedra 3500 needle wheel feed. Sedra 9000 mesh wheel recirc and gate valve. $350

Kent Nautalis TE skimmer. Has Crack in chamber but does not leak. Comes with Via Aqua pump, mesh modded. With the venturi drilled out and the mesh mod I would rate it up to 100gals. 75gal heavy stocking. $80

Reeflo Snapper NEW. $175
Reeflo Hammerhead 1 yr old. $250
Reeflo Barracuda 1yr old. $200
Mag 12. $30
Mag 9.5. Needs cover screws. $15
20L with misc pumps (seios maxi jets), auto top off. $50
300 Gallon Water Storage Tank w/ Kent float switch 4ââ"šÂ¬Ã¢"žÂ¢x4ââ"šÂ¬Ã¢"žÂ¢xââ"šÂ¬Ã¢"žÂ¢4. $150
SpectraPure 180gal/day MAXCAP. $400. Does not need filters. Has about 300gals left of DI

2x Kent Phosband Reactors one has plumber putty to stop a leak. I was too lazy to return it to Marine Depot $30/$25
Ã"šÃ‚¼ hrsp chiller (3yrs old). $150.
1/3 hrsp chiller with single stage Ranco (1yr old). $400.
95 gallon AGA Wave with cherry stand. Not drilled comes with 1200gph overflow. $400

 

[hermanx7]

I will take the mag 12. Pm me your info.

 

[Pescado Racing]

Interested in one of the Phosban reactors. PMed

 

[corivus]

Tenecor 300 gallon 96x24x30. Black Acrylic Stand about 3 years old. $800 in plumbing. 40 Gal Sump. Minor scratches but easy to buff out. Comes with 55gal Display Fuge with stand and 2 large UV filters (needs bulbs). $1200

just so I get it right, the 1200 covers all of that? going to try to convience the other half on that if it is....

 

[soni]

Correct. Part out prices are to get it moving. That tank is so cheap that you're still getting a great deal if you hiring the traveling acrylic buffer guy.

 

[Bagel Girl]

Hi, I am interested in the live rock and maybe a chiller if they are still available. PMed

 

[corivus]

alright soni I'll let you know I'll be talking with her tonight once I get off work and mebbie I might be getting my larger tank sooner then I thought I would

 

[chernandez]

I'll buy
3in Yellow tang $10
1.5in six line. $10
2in Conch. $5
pmed

 

[azrednex]

Does the reeflo snapper have a baldor motor?

 

[soni]

I'll look when I get home but I believe so. I know the Hammerhead and Barracuda do.

 

[littletruong]

do the chillers have a digital reading or seperate?

 

[DarkFORCE]

PMed

 

[vdhillon2]

i'll take the Mag 9.5...can stop by today.

 

[soni]

<a href=showthread.php?s=&postid=12572005#post12572005 target=_blank>Originally posted</a> by littletruong
do the chillers have a digital reading or seperate?

They need to be controlled by a controller. The 1/3 comes with a single stage Ranco

 

[vanmle]

I will take the Linkia

 

[soni]

Racing bug bit me and keeping up with my M3 requires the tank sell.

I live in avondale but office is in Chandler for your east side folks. Once live stock is gone I can bring any of the small things that way.

Tank Part Out:

Tenecor 300 gallon 96x24x30. Black Acrylic Stand about 3 years old. $800 in plumbing. 40 Gal Sump. Minor scratches but easy to buff out. Comes with 55gal Display Fuge with stand and 2 large UV filters (needs bulbs). $1200

200 LBS of very establish LR. $2/lb or $350. If you buy all the LR Iââ"šÂ¬Ã¢"žÂ¢ll throw in what little coral is in the tank. Some zoos, couple frags and some galaxia
6in Hippo Tang. $40. Has a small bit of head erosion under 1 eye. Due to vitamin deficiency from previous owner but is going away.

3in Yellow tang $10
1.5in six line. $10
2in Conch. $5
Blue Linkia (5years old). $20
Purple Beaded Sand Sifting Star about 4in across. $15
Lunar wrasse 4in. $20
Picasso Trigger 6in. $20
Niger Trigger 3in. $10

2x 400w Hamilton Reefstar Pendants w/ 14k bulb. 1yr old. Bulbs 1month old $200 each

Lightrail 3.5 w/ extra lamp kit and 8ft of track. $200

ASM G4. Has sedra 3500 needle wheel feed. Sedra 9000 mesh wheel recirc and gate valve. $350

Kent Nautalis TE skimmer. Has Crack in chamber but does not leak. Comes with Via Aqua pump, mesh modded. With the venturi drilled out and the mesh mod I would rate it up to 100gals. 75gal heavy stocking. $80

Reeflo Snapper NEW. $175
Reeflo Hammerhead 1 yr old. $250
Reeflo Barracuda 1yr old. $200
Mag 12. $30
Mag 9.5. Needs cover screws. $15
20L with misc pumps (seios maxi jets), auto top off. $50
300 Gallon Water Storage Tank w/ Kent float switch $150
SpectraPure 180gal/day MAXCAP. $400. Does not need filters. Has about 300gals left of DI

2x Kent Phosband Reactors one has plumber putty to stop a leak. I was too lazy to return it to Marine Depot $30/$25
Ã"šÃ‚¼ hrsp chiller (3yrs old). $150.
1/3 hrsp chiller with single stage Ranco (1yr old) and mag 9.5. $400.
95 gallon AGA Wave with cherry stand. Not drilled comes with 1200gph overflow. $400

 

[dvlax40]

hhey soni.... if you need any custom parts for your m3 hit me up.... just started a custom race company called f - u - k it motorsports... would love to make some gnarly headers for the beast

 

[CCall]

What brand are the chillers?

 

[soni]

custom sea life

 

[soni]

<a href=showthread.php?s=&postid=12572317#post12572317 target=_blank>Originally posted</a> by dvlax40
hhey soni.... if you need any custom parts for your m3 hit me up.... just started a custom race company called f - u - k it motorsports... would love to make some gnarly headers for the beast

I am getting the VF engineering stage 1 SC and 4:10 gears.