4 way vs 6way switch board

[marinefreak]

My question is due to spacial requirements i cannot fit the larger 6 way power boards.
I already have one 4 way board and would like to use some more.

I was told you can only have one analog one ? is this correct ?
I thought the advantage of the digital one was you could daisy chain then therefore not using up more "S" sockets. where the analog one would require a "S" socket per board.

 

[AQD_ottawa]

Hi

You are correct the analogues require 1 S port per power bar, where as the 6 way digitals can be daisy chained

 

[Matthias Gross]

on each S-port can one 4way powerbar connected

The ProfiLux Plus II (eX) has 2 S-ports, you can increase the amount with the card PLM-2L4S (adds 1 L-port and 1 S-port)

 

[marinefreak]

Thanks,

This is what i thought, however i was told by a supplier in Australia that you can only have one and this is why they do not have then on the suppliers list. They are only available in the kit.

I will now check with the distributor in AUS if they do bring them in.

I have the Profilus II Plus Ex so i already have 2 ports, and looking at getting one of those 2L4S modules.