_divad
Member
I am located in Richmond, very close to Richmond bart. I am a plumber and during the week I work from about 6-5 or so. Sometimes later. Message me or post on here with any questions.
Moved up to a 30x30x18" tall tank for my cuttlefish and coral display, so no need for old DT.
Tank measures 24.5 x 24.5 x 18.5" deep. No leaks. Tank has a few fine scratches on glass. Top lid of tank was modified by previous owner to be able to use a sea swirl. Sea swirl is long gone. I used the magic eraser by mr clean when cleaning the glass. I only ever saw the scratches when algae grew into them. I have not been able to get a picture of the scratches.
Stand footprint of 24x24. Stand is for a 60 gallon cube. I needed more space for my sump at the time. 45 gallon stand leaves little room.
Sump is a standard 10 gallon that has 2 baffles siliconed in. Not pretty, but it works.
This tank was running as a herbie overflow. So, two holes at bottom of overflow were used for overflow pipes. I drilled a 1/2" hole for return in the overflow area.
Tank comes with no plumbing at this point of time. Does come with bulkheads.
Comes with 5 gallon bucket of sand from marco rocks.
Price for tank/stand/sump $275.
40 Gallon breeder tank that was used as sump for multiple display set up. Not pretty. Holds water. You could take baffles out and use as qt tank. Comes with stickers from previous owner too! $30!
on to the pictures..
Top tank shot. You can see how the top was modified. And you can see the bulkhead in the overflow for the return.
Picture of 40 gallon sump
Moved up to a 30x30x18" tall tank for my cuttlefish and coral display, so no need for old DT.
Tank measures 24.5 x 24.5 x 18.5" deep. No leaks. Tank has a few fine scratches on glass. Top lid of tank was modified by previous owner to be able to use a sea swirl. Sea swirl is long gone. I used the magic eraser by mr clean when cleaning the glass. I only ever saw the scratches when algae grew into them. I have not been able to get a picture of the scratches.
Stand footprint of 24x24. Stand is for a 60 gallon cube. I needed more space for my sump at the time. 45 gallon stand leaves little room.
Sump is a standard 10 gallon that has 2 baffles siliconed in. Not pretty, but it works.
This tank was running as a herbie overflow. So, two holes at bottom of overflow were used for overflow pipes. I drilled a 1/2" hole for return in the overflow area.
Tank comes with no plumbing at this point of time. Does come with bulkheads.
Comes with 5 gallon bucket of sand from marco rocks.
Price for tank/stand/sump $275.
40 Gallon breeder tank that was used as sump for multiple display set up. Not pretty. Holds water. You could take baffles out and use as qt tank. Comes with stickers from previous owner too! $30!
on to the pictures..
Top tank shot. You can see how the top was modified. And you can see the bulkhead in the overflow for the return.
Picture of 40 gallon sump
Last edited:
