Hi guys,my name is edric from Indonesia. i started this hobby about 2 years ago. I was starting from 260g LPS tank . Around May 2009 i decided to build another 700g SPS system tank at home .The preparation took me about 5 months to build this tank.
These are the data :
Main Tank : 260 L x 100 W x 80 H cm (T 15mm )
Sump : 160 L x 90 W x 70 H cm (T 12mm )
Return Pump : Reeflo Hummerhead Gold
Circulation pump : Royal Exclusiv Red Dragon II Titanium Pump 170W
Skimmer : X-Treme Double Injector Becket System
Skimmer : Needle wheel 2xAquaBee 1200-1500L 8 x 31"
Denitrator : >2000L (8kg media) 8.00" OD & Pump 3000lph - w/Aquabee pump germany
Fluidizer : 2 pcs (Fluidizer Reactor ( excl pump) - 6.00"OD H16"(40cm) flowrate 1000 l/h
Calcium Reactor : Deltec PF 601S
Chiller : 2 hp
Ozonizer : Sander 100, controlled by Pinpoint ORP/REDOX
Piping : krylon BlackStone paint
Lighting :- MH SE 400w 20,000k (3 pcs) XM - Diamond Reflector
- Giesseman *T5 - AQUABLUE PLUS 54W ( 4 pcs)
T5 - ACTINIC PLUS 54W (4 pcs)
Reflector - Giesseman 4ft T5 (8 pcs)
Elbiru T5 Quicktronic eBallast - 2 x 54W (4 pcs)
Wavemaker : Tunze Turbelle Stream 4 x 6105 multicontroller 7095
Tunze Turbelle Stream 2 x 6205
Here are the set up pics :
Set up of Piping...
All the pipes are painted by Krylon Blackstone...
Set up of the RED Dragon pump for circulation in the main Tank... I drill 4 holes@1/2" at the bottom of the aquarium. I am using Loc-Line for SCWD Wavemaker for these water Flow.
Cleaning the Aquarium ...Starting to set up for LR and Sands
These are the data :
Main Tank : 260 L x 100 W x 80 H cm (T 15mm )
Sump : 160 L x 90 W x 70 H cm (T 12mm )
Return Pump : Reeflo Hummerhead Gold
Circulation pump : Royal Exclusiv Red Dragon II Titanium Pump 170W
Skimmer : X-Treme Double Injector Becket System
Skimmer : Needle wheel 2xAquaBee 1200-1500L 8 x 31"
Denitrator : >2000L (8kg media) 8.00" OD & Pump 3000lph - w/Aquabee pump germany
Fluidizer : 2 pcs (Fluidizer Reactor ( excl pump) - 6.00"OD H16"(40cm) flowrate 1000 l/h
Calcium Reactor : Deltec PF 601S
Chiller : 2 hp
Ozonizer : Sander 100, controlled by Pinpoint ORP/REDOX
Piping : krylon BlackStone paint
Lighting :- MH SE 400w 20,000k (3 pcs) XM - Diamond Reflector
- Giesseman *T5 - AQUABLUE PLUS 54W ( 4 pcs)
T5 - ACTINIC PLUS 54W (4 pcs)
Reflector - Giesseman 4ft T5 (8 pcs)
Elbiru T5 Quicktronic eBallast - 2 x 54W (4 pcs)
Wavemaker : Tunze Turbelle Stream 4 x 6105 multicontroller 7095
Tunze Turbelle Stream 2 x 6205
Here are the set up pics :
Set up of Piping...

All the pipes are painted by Krylon Blackstone...

Set up of the RED Dragon pump for circulation in the main Tank... I drill 4 holes@1/2" at the bottom of the aquarium. I am using Loc-Line for SCWD Wavemaker for these water Flow.



Cleaning the Aquarium ...Starting to set up for LR and Sands




