5017 ATO Pump

xabo

Premium Member
Lately the pump on my 5017 ATO will not shut off completely. After level light comes on, the pump partially shuts down as it continues a slow drip overfilling the sump unless I'm there to lift the pump out of the water breaking the siphon.

Any ideas as to what's going on?
 
Think I figured it out:

Failure: Water is filled continuously, although this is not necessary at all.

Remedy: The water level of the storage container must not be higher than the end of the feed hose;

Will have to either lower the height of the container or raise the height of the kalkstirrer.
 
Back
Top