6 bar Manual Override

[tnoblett]

I have a Profilux II plus set-up with the normal lights and pumps attached. The question is how do I manually turn on my lights after the program automatically shuts them down. Is there a one buttom deal like the feeder function??? Occasionally, we will have guest over in the evening where I would want the tank lite again.

Thanks

 

[AQD_ottawa]

extras
power socket function
Set to permenant on the socket you wish to over ride

 

[kidney514]

You can also click on the little sun on your profilux and that will bring you to the illumination and just hit arrow down and you will be able to do a manual illumination

 

[tnoblett]

Thanks but that would take some programming within the system or computer. I saw a check box within those screens that said "activate manual override". I thought there might be a quick button like how the "esc" button activates the feeding cycle.

 

[tnoblett]

I'll have to try that "sun button" tonight

 

[tnoblett]

Sorry about that... I don't use this function because I don't have dimmable lights. I run my VHO's and Halides through the on / off functions of the timers.

Back to square one...

 

[boboxx]

nope just set it up in the illumination section but just set the lamp type as a non dimable :c)

you can also do the manual override and set the state manualy

 

[Matthias Gross]

maybe you check the "maintenance" function

is explained in manual

 

[tnoblett]

Thanks for all the input...

Found it through the Illumination function - manual override thanks to Boboxx. I had setup my lights as Timers instead of Illumination. It still isn't a "one button" fix, but it works just as good.

Thanks again...

 

[Matthias Gross]

the function "maintenance" would be a "two button fix"