6060 placement

[miniatus2003]

I have a 90 gal tank being setup which will be a SPS tank. I have 2 6060 streams and was wondering if that will be to much for a tank 4 foot long. Where would be the best place to mount them.

Alan

 

[rvitko]

I would probably run one at a time but if it is mainly SPS it shouldn't be a problem. I would try a few positions and see what works for you. A good starting point is the top back corners aimed to the front center.

 

[miniatus2003]

What I done was order the attachment that allowed me to glue them on the side panels. I can remove them if thats not a good idea. Now Im debating on getting rhe magnets so I can place them everywhere. Should have ask questions first then bought the extras.

MINIATUS

 

[rvitko]

Even glued in place the pump still can slide up and down the rails and pivot, I think it should be OK.

 

[miniatus2003]

Thank you for your help. I was just concerned that with those two units and 800 GPH comming from the return it might be over kill.

MINIATUS