6105 master slave

[theshaman]

Hi guys. I have two 6105 powerheads and was wondering how to run one as a master and the other one a slave.

Thanks guys!


Sent from my iPhone using Tapatalk

 

[rvitko]

Set one to external mode with Main power at 100% the other two knobs to off. Connect the two controllers with a cable, you will make all the settings on the cable not in external mode. By default they will be synchornized, if you want the slave pump to run the opposite pulse so it is in pulse speed when the other is in main speed, push the food timer button and hold for 2 seconds on the pump in external mode.

 

[theshaman]

Set one to external mode with Main power at 100% the other two knobs to off. Connect the two controllers with a cable, you will make all the settings on the cable not in external mode. By default they will be synchornized, if you want the slave pump to run the opposite pulse so it is in pulse speed when the other is in main speed, push the food timer button and hold for 2 seconds on the pump in external mode.

Thank you so much for this. The cable I need to do this is the
7092.300
Right?


Sent from my iPhone using Tapatalk

 

[rvitko]

Yes, but a MIDI cable from Guitar Center will also work, or anyplace else you can find one.

 

[theshaman]

Ok. Thank you. I already have some midi cables at home.


Sent from my iPhone using Tapatalk