reefdude135
New member
Hi roger... I have a 6105 that works fine, but I have heard something about upgrades... A wider opening and something about jumpers? Can you provide more info on what is available? Thx!
6105 upgrades?
- Thread starter reefdude135
- Start date
All of our products are more or less constantly improving and evolving so a lot depends on purchase date with regards to what may be different. Here is a general run down.
July/August 2010- Titanium grade 2 shaft with 3005.740 anti attenuation disk introduced, quieter operation especially in wave mode. The silence clamp 6065.650 was also introduced around this time, this reduces noise transmission to the glass.
Nov 2011- bigger redesign, the pumps now come standard with the stock flow housing with 2" outlet and 6205.130 with 2.5" outlet (wide flow). Jumpers included with power supply change from 12, 15, 18 to 12, 18 and 24. 24V jumper available is a free upgrade. Shaft is now fixed in the pump and noise is even further reduced (this change is not retrofittable). Magnet holders are reduced in strength due to higher cost of neodymium (switch to ferrite, weaker magnet).
July/August 2010- Titanium grade 2 shaft with 3005.740 anti attenuation disk introduced, quieter operation especially in wave mode. The silence clamp 6065.650 was also introduced around this time, this reduces noise transmission to the glass.
Nov 2011- bigger redesign, the pumps now come standard with the stock flow housing with 2" outlet and 6205.130 with 2.5" outlet (wide flow). Jumpers included with power supply change from 12, 15, 18 to 12, 18 and 24. 24V jumper available is a free upgrade. Shaft is now fixed in the pump and noise is even further reduced (this change is not retrofittable). Magnet holders are reduced in strength due to higher cost of neodymium (switch to ferrite, weaker magnet).
