7097 ???

[GrampaDon]

Soon I hope
Will it be capable of the "Interval 2" thing like I was asking about in March.?
http://www.reefcentral.com/forums/showthread.php?t=2392663

 

[rvitko]

It looks like what you want to do isn't quite interval 2, which just idles one pump while the other pulses, the 7096 has that now in the windows version, it is referred to as interval with idle. What you link to is a line by line hour by hour type of program and it won't have that to my knowledge, it may be possible but if it is it will require the computer stay on and the bluetooth connection to the controller remains active. The prototype I saw had the functions of the latest Windows 7096 program, plus control of the LED lights, graphic display of pump speeds and light intensity and the ability to find weather patterns in specific locals and mimic them, but this required an active bluetooth stream between the controller and computer. It doesn't have a lot more memory than the 7096 did so saving a complex hour by hour program will not be possible.

 

[GrampaDon]

Ok the idle on one side while the other pulses is called Interval II. And yes I would like it to switch sides or directions every hour or so. And still go into night mode.

So can the Apex or DA stuff be programmed for this.? I have a basic RKL now but no modules.

Or just what is the easiest way to make the 6105s do the gyre thing.?

 

[rvitko]

You can set it so one pump pulses and the other idles at 30% and after so many minutes or hours they switch, the 7096 and 7097 can both do this. At night all 4 pumps can be set to run at 30%.

The Apex can do this for sure and you can program hour by hour. I think most of the more advanced computer based controllers allow hour by hour pump speed settings for each pump or pump pair.