kenghmoob
New member
I bought an AC 3 from a fellow member a few years ago. Just coming around installing it. The firmware on the AC 3 is 3.0. I understand that 3.4 is the latest one & probably the last one since the apex is the new kid on the block. I am having a difficult time updating the firmware & don't know why it is not working. When i run the ac3loader.exe I get a window that asks for:
(Firmware/Web Update) (DHCP Setup)
Login: IP Starting Pool:
Password: Size of Pool:
IP Address: Boot file:
HTTP port: MasK:
I think that I have everything entered correctly but all I get is:
AquaController Update Firmware starting...
Error at socket(): 10060
when I press the "Update Firmware" button. When I press the "Update Web Pages" button, I get:
Can't open
Can't open
Can't open
Can't open
Are my settings wrong, or maybe I configured it wrong somewhere else. I am connecting the AC 3 directly from it's ethernet port into my PC's port. Any help would greatly be appreciated.
(Firmware/Web Update) (DHCP Setup)
Login: IP Starting Pool:
Password: Size of Pool:
IP Address: Boot file:
HTTP port: MasK:
I think that I have everything entered correctly but all I get is:
AquaController Update Firmware starting...
Error at socket(): 10060
when I press the "Update Firmware" button. When I press the "Update Web Pages" button, I get:
Can't open
Can't open
Can't open
Can't open
Are my settings wrong, or maybe I configured it wrong somewhere else. I am connecting the AC 3 directly from it's ethernet port into my PC's port. Any help would greatly be appreciated.
