ACJr+DC8 - lights turn themselves on

[sdheath]

I've been going nuts trying to figure this out... When my MH lamp shoud be off, it turns on for about a minute every hour or so. I run a very simple program for lights and feed mode for a few pumps, with no OSC or anything else that might interfere. The MH is running on an Icecap ballast. I tried both #1 and #4 outlets but the problem happens in both. I also put a transformer on the same outlet in case it was a load issue.

It seems like something is causing it to turn on, then the timer comes along and sees it should be off so it sends the off command. But what could be causing it to turn on?

 

[clp]

Check for duplicate timer name and/or control addresses in the setup->timer setup->timer names section. Try rebooting the controller. If you are still stuck, please email the complete program and timer names to support@neptunesys.com.

Curt