AI Prime LED RSR Nano

Julian.Rad17

New member
I have the Red sea reefer 28 gallon with the AI Prime LED. So far all of my corals (LPS, zoas, monti) have done great under this light but I was wondering if anyone knows how strong this light can be/ PAR levels and if it would be sufficient for other SPS, anemones etc. Here are my light settings.

Cool White- 35%
Deep Red- 5%
Green- 10%
Blue- 65%
Deep Blue- 60%
Violet- 45%
UV- 45%

They run for 9 hrs a day with a 2 hour ramp time. Should any of these settings be changed for specific corals or do they seem ok?
 
I have the Red sea reefer 28 gallon with the AI Prime LED. So far all of my corals (LPS, zoas, monti) have done great under this light but I was wondering if anyone knows how strong this light can be/ PAR levels and if it would be sufficient for other SPS, anemones etc. Here are my light settings.

Cool White- 35%
Deep Red- 5%
Green- 10%
Blue- 65%
Deep Blue- 60%
Violet- 45%
UV- 45%

They run for 9 hrs a day with a 2 hour ramp time. Should any of these settings be changed for specific corals or do they seem ok?

Looks fine to me. It's a good light, I run two on my tank, they are strong enough for all but the most demanding SPS especially in the upper part of the tank.
 
AI's website says it has a max PAR of 260 at a depth of 12 inches. Is this 12 inches from the light or under the water?

Looking at their site, it looks like open air. I'm sure you could find PAR ratings at depth online somewhere, but PAR is not everything either.

I was just checking AI's site and it looks like there is a new HD Prime also... I just bought mine six weeks ago so that kinda sucks, but the HD's allow you to pull power from other LED's you're not using much like green or red and apply it to have more blue, or whatever. Honestly though unless the tank is 24"+ deep or you want SPS on the bottom it probably doesn't really matter.
 
Last edited:
Back
Top