BRS Reactor Question

[drew2007]

Just set up my bio pellet reactor. I noticed some air bubbles inside canister. Will this be a problem? Will they eventually disappear?

 

[cakemanPA]

There is an air release button in top of my reactor. I just hold that down until the air is gone.

 

[Showtime1]

There is an air release button in top of my reactor. I just hold that down until the air is gone.

 

[drew2007]

There is an air release button in top of my reactor. I just hold that down until the air is gone.

I dont have that on mine. Its the single BRS pellet reactor.

 

[xfactor1315]

can unscrew the canister while its running very very slowly and slightly until the air purges out and water is about to come out then tighten it, thats what I do when i run my return dry and lots of air gets in my reactor.

 

[drew2007]

can unscrew the canister while its running very very slowly and slightly until the air purges out and water is about to come out then tighten it, thats what I do when i run my return dry and lots of air gets in my reactor.

I was just thinking about doing that. Thanks!