jiriki
New member
I currently use the feed off my return pump. But there is way too much pressure. I consquently, have to put a valve at the return line to regulate flow through the reactor. It doesn't seem to be all that reliable as the effluent seems to slow down over time.
My understanding is that a smaller feed pump, such as a Maxijet with an adapter would provide constant pressure but not the to point of bursting the seams of my reactor. I can then just put the valve at the effluent out of the reactor instead.
If my understanding is correct, anyone know what adapter or where I can find one which I can hook a maxijet to a calc reactor? My reactor uses 1/4" plastic ro/di lines as an input feed.
-Jon
My understanding is that a smaller feed pump, such as a Maxijet with an adapter would provide constant pressure but not the to point of bursting the seams of my reactor. I can then just put the valve at the effluent out of the reactor instead.
If my understanding is correct, anyone know what adapter or where I can find one which I can hook a maxijet to a calc reactor? My reactor uses 1/4" plastic ro/di lines as an input feed.
-Jon
