Canopy vs Rimless?

The difference would be so small you wouldn't be able to tell. Even with a canopy you'll have evaporation.


Sent from my iPhone using Tapatalk
 
Is the only drawback for going rimless is more water evap?

-I'm actually finding that the visual water line of a rimless tank is a drawback..
(Got my first rimless tank over a year ago and I think I actually like a trimmed/canopied tank better now just because of that)

-Need to prevent fish jumping out pretty much forces some sort of screen/top anyways..

-Depending on how sealed the canopy is will effect how much evaporates given identical surface area/surface agitation,etc...
Many canopies are open enough (doesn't take much) that evaporation rates aren't that much different..

-Spilling of water over the edge during "wave surges" from fish or glass cleaning near the surface,etc... can be annoying..
 
Any fish can jump so a screen top would be a good idea. Canopy or trim would hide this better. I don’t have a hood and have radions mounted above my main tank. If it is in a main living area like a tv room the light spillage can be annoying while trying to watch a movie. Mine is in a dedicated den style living space and if I am viewing my tank with the room lights turned off the entire wall lights up behind it. I think it is distracting and kind of takes away from the tank. I’m considering building a canopy for mine, just have to find the time. A canopy will also mute some of the noise if needed.
 
Older pic but you can kind of see what I am talking about here.
 

Attachments

  • 3B736249-586B-4DC2-8A84-BD30B5623EC5.jpg
    3B736249-586B-4DC2-8A84-BD30B5623EC5.jpg
    52.5 KB · Views: 2
I've had mine in a wall(180g) , I have a 400g with a canopy currently, and I also have a rimless(80g). I like the 400g the most, yes it's my center piece, but you have infinite things you can do with a canopy as far as woodwork / stone / tile... you name it. A canopy you can add your touch to.

I honestly hate the rimless, the splash over alone while I'm cleaning the glass is annoying. If you don't go slow with it you're going to be cleaning the glass afterwards.


Sent from my iPhone using Tapatalk
 
It's more of a personal preference. I have a RSR250 with a custom acrylic lid and I really like it. I have found that getting into the tank is a lot easier than having to maneuver around a canopy. The canopy look can look GREAT if done right, but my vote goes to rimless.
 
-I'm actually finding that the visual water line of a rimless tank is a drawback..
(Got my first rimless tank over a year ago and I think I actually like a trimmed/canopied tank better now just because of that)

-Need to prevent fish jumping out pretty much forces some sort of screen/top anyways..

-Depending on how sealed the canopy is will effect how much evaporates given identical surface area/surface agitation,etc...
Many canopies are open enough (doesn't take much) that evaporation rates aren't that much different..

-Spilling of water over the edge during "wave surges" from fish or glass cleaning near the surface,etc... can be annoying..

MAC,

I have a canopy that's about oh I dunno 10" tall.. My lid opens upward at an angle and the lights I have are mounted on the lid so it ride with the lid. I am considering getting the CBB's viaspectras or w/e but I would need a taller canopy to have the ligts min 10" above water line so I am looking at canopy options to build.. My wife is not in favor of no canopy lol.. she didnt like the looks of the lights being exposed etc...I guess I could try and build myself a custom canopy to house the CBB lights I wanna get
 
I think the evaporation would be minimal compared one to the other, that being said i've never had a rimless tank until now and i would say that for me it looks more elegant than normal tanks(personal opinion of course).the only drawback that is already been posted here for me is the water spilling,when you cleaning the glass you have to be extremely careful if not you will be cleaning your glass afterwards, aside from that i think i'm not going back to the traditional tanks again.
 
A couple (maybe obvious) drawbacks that haven't been mentioned.

Safety factor is decreased with rimless, so much thicker glass has to be used.

This leads to much higher cost. Clarity can be an issue unless low-iron glass is used...which leads to higher cost again.
 
-I'm actually finding that the visual water line of a rimless tank is a drawback..
(Got my first rimless tank over a year ago and I think I actually like a trimmed/canopied tank better now just because of that)

-Need to prevent fish jumping out pretty much forces some sort of screen/top anyways..

-Depending on how sealed the canopy is will effect how much evaporates given identical surface area/surface agitation,etc...
Many canopies are open enough (doesn't take much) that evaporation rates aren't that much different..

-Spilling of water over the edge during "wave surges" from fish or glass cleaning near the surface,etc... can be annoying..

Starting to feel the same about my rimless. Great points here
 
I do not agree with this.

i use glass tops on my rimmed tanks and the evap is drastically less!



I said nothing about having a top on a tank. Obviously placing a top on a tank will reduce evaporation. A canopy =/= glass top ontop of a tank.


Sent from my iPhone using Tapatalk
 
I do not agree with this.
i use glass tops on my rimmed tanks and the evap is drastically less!

+20

When I leave the lid off on my tank to make room for the auto-feeder while traveling, I notice a considerable amount more evaporation. There is a 3mm gap between the lid and the rim of the tank all the way around, but even still, evaporation is significantly reduced by having a lid on there. I only top off once every couple weeks with the lid on, usually right before I do a water change.

Granted, I have a 9-gallon, so removing the lid is super easy and light, so YMMV.
 
Back
Top