Chaeto reactor LEDs

[acidflea]

Looking for suggestions on lights to wrap around a reactor for growing cheato. If you have used a specific item and had good results please share a link to it.

 

[nemosworld]

https://www.amazon.com/Flexible-Non...UTF8&qid=1511357085&sr=8-3&keywords=led+strip

 

[RobZilla04]

https://www.marinedepot.com/Accel_A...riums-Accel_Aquatics-6H94602-FILTFILD-vi.html

Chose this one simply because it was mentioned in another thread with pics proving it's growth potential.

Here is mine for reference:

http://reefcentral.com/forums/showthread.php?t=2657457

 

[BigT75]

What pump do you use if I may ask


Sent from my iPhone using Tapatalk

 

[RobZilla04]

The Aquatop comes with a pump.

https://www.amazon.com/AQUATOP-MR-2...1361839&sr=8-1&keywords=aquatop+media+reactor

 

[acidflea]

https://www.marinedepot.com/Accel_A...riums-Accel_Aquatics-6H94602-FILTFILD-vi.html

Chose this one simply because it was mentioned in another thread with pics proving it's growth potential.

Here is mine for reference:

http://reefcentral.com/forums/showthread.php?t=2657457

When you started using your reactor did you turn off the GFO reactor at the same time or let the GFO run for a bit?

Thanks

 

[RobZilla04]

The GFO was off for months before I put the chaeto in. I wouldnt suggest doing both at the same time or over lapping.

 

[acidflea]

The GFO was off for months before I put the chaeto in. I wouldnt suggest doing both at the same time or over lapping.

How long do you run your lights for on the reactor?

Thanks

 

[Cheapreef]

How long do you run your lights for on the reactor?

Thanks

Best to run it opposite to your DT light cycle.

 

[BigT75]

So I ordered that light from marine Depot so Un impressed to have a plug and pin set up that fell apart as soon as I unrolled it and I got it to work once nothing since tried calling them hold Time was over 30 min still no response closed on weekends lol for $23 bucks I'd expect some what better quality ok rant over lol


Sent from my iPhone using Tapatalk

 

[kord83]

I am using two little fishes reactor with the marine depot strip. Now i am seeing some hair line cracks in the acrylic. Have any of you guys had that?

 

[RobZilla04]

How long do you run your lights for on the reactor?

Thanks

Roughly 12 hours opposite the DT light schedule.

 

[RobZilla04]

So I ordered that light from marine Depot so Un impressed to have a plug and pin set up that fell apart as soon as I unrolled it and I got it to work once nothing since tried calling them hold Time was over 30 min still no response closed on weekends lol for $23 bucks I'd expect some what better quality ok rant over lol


Sent from my iPhone using Tapatalk

Yes the two pin "cheap" part was frustrating. I found it easy to simply wrap the reactor with the LED strip while the pin portion was disconnected. Once wrapped and zip tied, I reconnected the pin/plug and haven't had an issue yet. Cleaned it out at least 5 times now and never had it come loose again.

I went with the Marine Depot strip because I knew the spectrum of light would be correct.

 

[urban_s]

I used a two little fishes reactor and a strip of "grow" leds from amazon...I made sure to get the one with the end on it...Soldering to the two tiny little bits gets frustrating.

 

[BigT75]

I want to shoutout to Jeff and Christian @ Marine Depot they took care of my light issue this morning again thanks guys


Sent from my iPhone using Tapatalk

 

[urban_s]

https://www.amazon.com/Lahoku-Plant...12420348&sr=8-8&keywords=grow+light+led+strip